자동차

Develop, Resize, and Calibrate Motors with Dynamometer Test Harness (Powertrain Blockset)
Develop a control test bench, resize e-motors, and calibrate controllers using the motor dynamometer reference application.
Build Full Electric Vehicle Model (Powertrain Blockset)
Build a vehicle with a motor-generator, battery, direct-drive transmission, and powertrain control algorithms using the electric vehicle (EV) reference application.
Hybrid and Electric Vehicle Reference Application Projects (Powertrain Blockset)
Start building your own hybrid and electric vehicle models with reference application projects.
Generate Optimal Current Controller Calibration Tables for Permanent Magnet Synchronous Motors (Powertrain Blockset)
Generate optimized current controller and flux parameters for permanent magnet synchronous motor (PMSM) blocks.
Preprocess Permanent Magnet Synchronous Motor (PMSM) Data and Autogenerate Current Controller Calibration Tables (Model-Based Calibration Toolbox)
Permanent magnet synchronous motor (PMSM) data preprocessing.

Code Generation for Path Planning and Vehicle Control (Automated Driving Toolbox)
Generate C++ code for a path planning and vehicle control algorithm, and verify the code using software-in-the-loop simulation.
Generate RoadRunner Scenario from Recorded Sensor Data (Automated Driving Toolbox)
Generate RoadRunner Scenario from recorded GPS data and preprocessed actor track list.
Forward Collision Warning Application with CAN FD and TCP/IP (Vehicle Network Toolbox)
This example shows how to execute a forward collision warning (FCW) application with sensor and vision data replayed live via CAN FD and TCP/IP protocols.
Lane-Keeping System for Self-Driving Trucks (Automated Driving Toolbox)
Design a lane-keeping system for self-driving trucks in Simulink^® and simulate it with RoadRunner Scenario.

Get Started with the Virtual Vehicle Composer (Vehicle Dynamics Blockset)
Use the Virtual Vehicle Composer app to configure, build, test, and analyze a virtual vehicle.
Double-Lane Change Maneuver (Vehicle Dynamics Blockset)
Analyze vehicle ride and handling, including yaw stability, using this reference application.
Kinematics and Compliance Virtual Test Laboratory (Vehicle Dynamics Blockset)
Virtually calibrate suspension blocks using this reference application.
Longitudinal Motorcycle Braking Test (Vehicle Dynamics Blockset)
Analyze motorcycle ride and handling during a braking test using this reference application.

Internal Combustion Engine Reference Application Projects (Powertrain Blockset)
Use these reference applications as a starting point for your own internal combustion engine vehicle models.
Spark Ignition (SI) Calibration Workflow (Model-Based Calibration Toolbox)
Systematically develop a set of optimal steady-state SI engine calibration tables using the Model-Based Calibration Toolbox™.
Simulate Five-Cycle Energy Consumption Tests Using Virtual Vehicle Model (Powertrain Blockset)
Generate energy consumption data to use in range adjustment factor calculations for an electric vehicle.
Characterize Powertrain Blockset and Simscape Battery Blocks (App) (Model-Based Calibration Toolbox)
Characterize Simulink or Simscape™ battery block parameters using the MBC Optimization app.

Design and Simulate AUTOSAR Components and Generate Code (AUTOSAR Blockset)
Develop AUTOSAR components by implementing behavior algorithms, simulating components and compositions, and generating component code.
Generate Drive Cycles for Real Driving Emissions (Powertrain Blockset)
Meet the Real Driving Emissions standard required by the European Union.
Highway Lane Following: A Model-Based Design Example for ISO 26262:2018 (IEC Certification Kit)
Demonstrates the use of Simulink to apply a Model-Based Design workflow to an ISO 26262 ASIL D project.
Implement Distributed ECU Network over CAN in Simulink (Vehicle Network Toolbox)
Use Vehicle Network Toolbox™ and Simulink to implement a distributed Electronic Control Unit (ECU) network over CAN for an automobile.