이 페이지는 기계 번역을 사용하여 번역되었습니다. 최신 내용을 영문으로 보려면 여기를 클릭하십시오.
빠른 제어 인터페이스
빠른 제어 인터페이스는 기본 IVI-C 드라이버를 사용하는 오실로스코프, 함수 발생기, RF 신호 발생기 및 RF 스펙트럼 분석기를 제어하는 데 사용됩니다. 이런 사용하기 쉬운 인터페이스에서는 드라이버를 직접 다룰 필요가 없습니다.
함수
도움말 항목
빠른 제어 오실로스코프
- Quick-Control Oscilloscope Requirements
You can use the Quick-Control Oscilloscope for any oscilloscope that uses an underlying IVI-C driver. - Read Waveforms Using the Quick-Control Oscilloscope
This example shows the general workflow to use for the Quick-Control Oscilloscope. - Read a Waveform Using a Tektronix Scope
Reading a waveform with a Tektronix® scope using Quick-Control Oscilloscope is basically the same workflow as described in the Read Waveforms Using Quick-Control Oscilloscope example using a Keysight® scope with VISA. - Quick-Control Oscilloscope Functions
Theoscilloscopefunction can use the following special functions, in addition to standard functions such asconnectanddisconnect. - Quick-Control Oscilloscope Properties
The Quick-Control Oscilloscopeoscilloscopefunction can use the following properties.
빠른 제어 함수 생성기
- Quick-Control Function Generator Requirements
You can use the Quick-Control Function Generator for simplified fgen control and waveform generation without having to directly deal with the underlying driver. - Generate Standard Waveforms Using the Quick-Control Function Generator
Use the Quick-Control Function Generator to generate a standard waveform. - Generate Arbitrary Waveforms Using Quick-Control Function Generator
Use the Quick-Control Function Generator to generate an arbitrary waveform. - Quick-Control Function Generator Functions
Thefgenfunction uses the following functions, in addition to standard functions such asconnectanddisconnect. - Quick-Control Function Generator Properties
Thefgenfunction can use the following properties.
빠른 제어 RF 신호 생성기
- Quick-Control RF Signal Generator Requirements
You can use the Quick-Control RF Signal Generator for simplified rfsiggen control and waveform generation without having to directly deal with the underlying driver. - Quick-Control RF Signal Generator Functions
Therfsiggenfunction uses the following functions. - Quick-Control RF Signal Generator Properties
Therfsiggenfunction uses the following properties. - Download and Generate Signals with RF Signal Generator
These examples show how to create therfsiggenobject, download waveforms, and generate signal and modulation output.
문제 해결
Troubleshooting IVI and Quick-Control Interfaces
Try these tips if you have problems using the toolbox with the IVI and Quick-Control interfaces. Includes information about supported platforms, adaptor requirements, configuration and connection, and other interface-specific tips.
추천 예제
Reading Waveforms from an Oscilloscope Using a Quick-Control Oscilloscope Object
Use the Quick-Control Oscilloscope to acquire waveforms from an oscilloscope.
Creating and Downloading an Arbitrary Waveform to a Function Generator
Use the Quick-Control Function Generator to generate arbitrary waveforms.
802.11 OFDM Beacon Frame Generation and Transmission with Test and Measurement Equipment
Generate packets containing MAC beacon frames suitable for baseband simulation or over-the-air transmission using WLAN Toolbox™ software, Instrument Control Toolbox™ software, and Keysight Technologies™ RF signal generator.
LTE Waveform Generation and Transmission Using Quick Control RF Signal Generator
How an over-the-air LTE waveform can be generated and transmitted using LTE Toolbox™, Instrument Control Toolbox™ and Keysight Technologies® RF instruments.
RF 신호 생성기에 IQ 파형 생성 및 다운로드
이 예제에서는 Quick-Control RF 신호 생성기를 사용하여 RF 파형을 생성하고 전송하는 방법을 보여줍니다.
Create App for Acquiring Waveform Data from Oscilloscope
Create an app to acquire waveform data from an oscilloscope.
Spectrum Analyzer Plot
Use the Quick Control Spectrum Analyzer to acquire power spectrum data from a Keysight® Technologies N9040B spectrum analyzer.
