실시간 배포 및 코드 생성
실시간 배포 및 코드 생성 프로세스는 Simulink® Real-Time™을 사용하여 Simscape™ 모델에서 생성하는 실시간 애플리케이션을 다운로드하고 실행하는 방법을 보여줍니다. 또한 시뮬레이션 오버런을 확인하고 Simulink Real-Time을 사용하여 실시간 타깃에서 플랜트 기반 애플리케이션에 대한 런타임 파라미터를 변경할 수 있습니다.
함수
slrtExplorer | Open Simulink Real-Time explorer and interact with target computers and real-time applications |
simscape.findNonlinearBlocks | Check model for blocks with nonlinear equations |
도움말 항목
- 실시간 코드 생성 및 배포 프로세스
HIL(Hardware-in-the-Loop) 시뮬레이션 워크플로에 따라 Simulink Coder™와 Simulink Real-Time을 사용하여 실시간 타깃 머신에 Simscape 모델을 배포합니다.
- HIL(Hardware-in-the-Loop) 시뮬레이션 기본 사항
HIL(Hardware-in-the-Loop) 시뮬레이션을 사용하여 제어기가 실제 가상 자극에 어떻게 반응하는지 실시간으로 확인할 수 있습니다.
- Simulink Real-Time Code Generation
Follow the recommendations for minimum hardware and software specifications to deploy your Simscape model for hardware-in-the-loop (HIL) simulation using Simulink Real-Time.
- Software and Hardware Configuration
Before you simulate your Simscape model on your target hardware using Simulink Real-Time, follow the recommendations to configure your development and target computers for code generation and real-time simulation.
- Signal and Parameter Visualization and Control
Monitor and control signals and parameters when you simulate your Simscape model on a real-time target hardware using Simulink Real-Time.
- Requirements for Using Alternative Platforms
Follow the recommendations for minimum hardware, software, and compiler specifications to deploy your Simscape model for hardware-in-the-loop (HIL) simulation using a custom standalone application.
- Embedded and Generic Real-Time Resources
Simulink Coder and Embedded Coder® use system target files (STFs) to generate code for interfacing with specific real-time operating systems.