물리 모델링

물리 시스템의 모델 생성, 최적화 및 테스트

Simscape™ 제품을 사용하여 물리 시스템을 모델링하고 최적화와 테스트를 수행할 수 있습니다. 기계, 유압, 전기, 공압, 열 도메인의 구성요소를 네트워크에 연결하여 물리 시스템을 모델링합니다. Simscape 언어를 사용하여 사용자 지정 구성요소를 만들 수도 있습니다. Simscape 제품을 사용하면 서로 다른 도메인의 전문가들이 단일 시뮬레이션 환경에서 협업하여 시스템 수준에서 성능을 최적화하고 제어 알고리즘을 테스트할 수 있습니다. MATLAB^®과 Simulink^®와 함께 작업해서 딥러닝 및 예측 정비와 같은 기법도 수행할 수 있습니다. 모델을 HIL(hardware-in-the-loop) 시스템 등의 다른 환경으로 배포할 수 있도록 Simscape 제품은 코드 생성을 지원합니다.

The Simscape product group depicted with Simscape as the foundation product, supporting Simscape Electrical, Simscape Battery, Simscape Fluids, Simscape Multibody, and Simscape Driveline. Examples of physical modeling environments include electrical, mechanical, magnetic, thermal, custom, isothermal liquid, two-phase fluid, gas, and moist air.

물리 모델링 관련 제품

Simscape

멀티도메인 물리 시스템 모델링 및 시뮬레이션

Simscape Battery

Design and simulate battery and energy storage systems

Simscape Driveline

Model and simulate rotational and translational mechanical systems

Simscape Electrical

Model and simulate electronic, mechatronic, and electrical power systems

Simscape Fluids

Model and simulate fluid systems

Simscape Multibody

Model and simulate multibody mechanical systems

도움말 항목

전자 및 메카트로닉 시스템

Analyze a Simple Circuit (Simscape Electrical)
Use the Powergui block to analyze static and frequency-domain response.
Build and Simulate a Simple Circuit (Simscape Electrical)
Build a Simscape Electrical™ model and parameterize the blocks using datasheet values, run the model, and examine the results.
Modeling Analog Circuit Architectures, Mechatronic Systems, and Electrical Power Systems Using Simscape Electrical (Simscape Electrical)
Model mechatronic systems, analog circuit architectures, and single- and multi-phase electrical power systems that you can connect to networks in other Simscape domains.
Build Simple Model of Battery Pack in MATLAB and Simscape (Simscape Battery)
Create and build a Simscape system model of a battery pack with Simscape Battery™.

유체 시스템

Electric Vehicle Thermal Management (Simscape Fluids)
Model the thermal management system of a battery electric vehicle.
Modeling and Simulation of Fluid Networks (Simscape Fluids)
Learn the basics of constructing a model in Simscape Fluids™.
Model an Isothermal Actuation System (Simscape Fluids)
Use isothermal components to model a simple actuation system.

로보틱스

Pick and Place Robot Using Forward and Inverse Kinematics (Simscape Multibody)
Model a delta robot performing a pick and place task.
Train Humanoid Walker (Simscape Multibody)
Model a humanoid robot using Simscape Multibody™ and train it using either a genetic algorithm (which requires a Global Optimization Toolbox license) or reinforcement learning (which requires Deep Learning Toolbox™ and Reinforcement Learning Toolbox™ licenses).

이동체(Vehicles)

Capabilities of Simscape Driveline Software (Simscape Driveline)
Learn about modeling drivetrains in the Simscape Driveline™ environment.
Complete Vehicle Model (Simscape Driveline)
Explore a model that includes an engine, a transmission, and drivetrain-wheel-road coupling.
Vehicle Dynamics - Car with Heave and Roll (Simscape Multibody)
Model vehicle dynamics using a vehicle model that has 14 degrees of freedom.

가상 테스트 및 설계 최적화

Aircraft Fuel Supply System with Three Tanks (Simscape Fluids)
Model an aircraft fuel supply system consisting of three tanks and an engine.
Solar Power Inverter (Simscape Electrical)
Determine the efficiency of a single-stage solar inverter.
Power-Split Hybrid Transmission (Simscape Driveline)
This example shows the basic architecture of a power-split hybrid transmission.

모델 배포

Electric Vehicle Configured for HIL (Simscape Electrical)
Model an electric vehicle model suitable for Hardware-In-the-Loop (HIL) deployment.
Generate HDL Code for Simscape Models (HDL Coder)
Generate HDL code from Simscape switched linear models.
Hardware-in-the-Loop Implementation of Simscape Model on Speedgoat FPGA I/O Modules (HDL Coder)
This example shows how to synthesize and generate FPGA bitstream from a Simscape™ half-wave rectifier model and download the bitstream to a Speedgoat® FPGA I/O 334-325K target for Hardware-in-the-Loop (HIL) implementation.
How Simscape Code Generation Differs from Simulink (Simscape)
Learn about Simscape code generation specifics.