Contribute at least one answer each month for 3 consecutive months
Awarded to Yazan on 02 Sep 2021
Answer 1 question that was unanswered for more than 30 days
Awarded to Yazan on 11 Aug 2021
20 of your answers have been accepted
Awarded to Yazan on 01 Aug 2021
Accept 5 answers given by other contributors
Awarded to Yazan on 14 Jul 2021
Provide your first answer ever to someone else's question
Awarded to Yazan on 30 Jun 2021
Solve all the problems in Indexing V
Awarded to Yazan on 27 May 2021
Solve a problem for the first time
Awarded to Yazan on 22 May 2021
Download any 10 unique submissions
Awarded to Yazan on 01 Dec 2019
Publish your first submission
Awarded to Yazan on 09 Oct 2019
Feeds
답변 있음
Reading CSV file within Matlab exe gives unexpected result
Problem was solved by decrypting the CSV files before being used by the Matlab exe (the files were encrypted).
Reading CSV file within Matlab exe gives unexpected result
Problem was solved by decrypting the CSV files before being used by the Matlab exe (the files were encrypted).
12개월 전 | 0
| 수락됨
질문
Reading CSV file within Matlab exe gives unexpected result
Hello, I have a Matlab script that I want to compile into a standalone exe. The script reads a CSV file (the path to which is i...
대략 1년 전 | 답변 수: 1 | 0
1
답변질문
Does Matlab provide online linear fitting?
Hi all, I am looking for Matlab function or framework to perform linear fitting online, meaning I am looking for updating my li...
1년 초과 전 | 답변 수: 1 | 0
1
답변질문
Fake differences between figures generated on different machines
Hi all, Matlab figures generated on different machines cannot be compared pixel-to-pixel. In the attached left-hand figure, y...
1년 초과 전 | 답변 수: 0 | 0
0
답변질문
Distinguishing between boards based on connection type
Hi all, I have two development boards that I can connect to using Matlab. One uses a USB connection, while the other one an Eth...
대략 2년 전 | 답변 수: 0 | 0
0
답변질문
Inaccurate results when writing xls through writetable
Hello everyone. I am using Matlab R2021b. I write then save .xls files from a table using writetable. After saving, I write aga...
2년 초과 전 | 답변 수: 1 | 0
1
답변답변 있음
Find the Averaged periodogram
You need to use Welch’s method for power spectral density estimation. Read the details here, and see the demo below. clc, clear...
Find the Averaged periodogram
You need to use Welch’s method for power spectral density estimation. Read the details here, and see the demo below. clc, clear...
거의 3년 전 | 0
답변 있음
How can applied FrFT of an ECG signal estimated as discrete fractional Fourier transform based on Eigen decomposition?
To compute the FrFT, you may use this contribution (I haven't tested myself). If you need the computation to be performed based ...
How can applied FrFT of an ECG signal estimated as discrete fractional Fourier transform based on Eigen decomposition?
To compute the FrFT, you may use this contribution (I haven't tested myself). If you need the computation to be performed based ...
거의 3년 전 | 0
답변 있음
Hello guys, i need help for estimating FAR from this formula can review my code please
Have you noticed that the distributions defined in your codes are not Gaussian? See the demo below mu = 3; sigma = 1; x = mu-...
Hello guys, i need help for estimating FAR from this formula can review my code please
Have you noticed that the distributions defined in your codes are not Gaussian? See the demo below mu = 3; sigma = 1; x = mu-...
거의 3년 전 | 0
답변 있음
How to do a hankel transform on a matrix in Matlab?
The Hankel transform (HT) of a vector is a vector and of a matrix is, naturally, a matrix. You mentioned that in your applicatio...
How to do a hankel transform on a matrix in Matlab?
The Hankel transform (HT) of a vector is a vector and of a matrix is, naturally, a matrix. You mentioned that in your applicatio...
거의 3년 전 | 0
답변 있음
Docked figures tabs postion from top to left in code?
f = figure; tg = uitabgroup(f, 'TabLocation', 'right'); tab1 = uitab(tg, 'Title', 'Figure 1'); tab2 = uitab(tg, 'Title', 'Fig...
Docked figures tabs postion from top to left in code?
f = figure; tg = uitabgroup(f, 'TabLocation', 'right'); tab1 = uitab(tg, 'Title', 'Figure 1'); tab2 = uitab(tg, 'Title', 'Fig...
거의 3년 전 | 1
| 수락됨
답변 있음
what does this Complex values are not supported mean?
tetagrados is a vector of complex numbers. So, first of all, notice that the function plot throws a warning and plots only the r...
what does this Complex values are not supported mean?
tetagrados is a vector of complex numbers. So, first of all, notice that the function plot throws a warning and plots only the r...
대략 3년 전 | 0
| 수락됨
답변 있음
How do I sort files by part of their filename?
You can use the following to search for files in the current folder that have a specific name format: P = dir('*I=0.5') % P = ...
How do I sort files by part of their filename?
You can use the following to search for files in the current folder that have a specific name format: P = dir('*I=0.5') % P = ...
대략 3년 전 | 0
답변 있음
Invert a histogram by emphasizing on the valleys
One way to do that probably is by subtracting the rate in each bin from the maximum rate. Below is an example with normal distri...
Invert a histogram by emphasizing on the valleys
One way to do that probably is by subtracting the rate in each bin from the maximum rate. Below is an example with normal distri...
3년 초과 전 | 1
| 수락됨
답변 있음
How to denoise chirp signal in low SNR condition with NLMS or any other methods?
As I mentioned in my comments to your question, it is recommended that you experiment with some state-of-the-art time-frequency ...
How to denoise chirp signal in low SNR condition with NLMS or any other methods?
As I mentioned in my comments to your question, it is recommended that you experiment with some state-of-the-art time-frequency ...
3년 초과 전 | 1
| 수락됨
답변 있음
How to find the maximum of peaks ?
Below, I am proposing an implementation of what I understood to be your task. You have to experiment with the findpeaks multiple...
How to find the maximum of peaks ?
Below, I am proposing an implementation of what I understood to be your task. You have to experiment with the findpeaks multiple...
3년 초과 전 | 0
| 수락됨
답변 있음
Making a matrix of R*C size that takes the values randomly from an array- Y.
i1 = 7; i2 = 8; y = [1 6 1 8 4 5]; randIdx = randi(length(y), 1, i1*i2); data = reshape(y(randIdx), i1, i2)
Making a matrix of R*C size that takes the values randomly from an array- Y.
i1 = 7; i2 = 8; y = [1 6 1 8 4 5]; randIdx = randi(length(y), 1, i1*i2); data = reshape(y(randIdx), i1, i2)
3년 초과 전 | 1
답변 있음
How can I interpolate rows in an array with a loop?
if A is an array, then Matlab will throw an error, as you are using curly braces for indexing. Below is a demo on how to user ...
How can I interpolate rows in an array with a loop?
if A is an array, then Matlab will throw an error, as you are using curly braces for indexing. Below is a demo on how to user ...
3년 초과 전 | 1
답변 있음
maxk from subset of array
clc, clear v = [10,22,3,-5,8,6,100,30,12,9]; subIdx = [1,3,5,8]; k = 2; % sort values and get corresponding indices [v...
maxk from subset of array
clc, clear v = [10,22,3,-5,8,6,100,30,12,9]; subIdx = [1,3,5,8]; k = 2; % sort values and get corresponding indices [v...
3년 초과 전 | 0
| 수락됨
답변 있음
How to remove empty line from struct?
D.f1 = [1 2 3 4 5]; D.f2 = []; % structure with 2 fields D % get fields fields = fieldnames(D) % remove empty fields...
How to remove empty line from struct?
D.f1 = [1 2 3 4 5]; D.f2 = []; % structure with 2 fields D % get fields fields = fieldnames(D) % remove empty fields...
3년 초과 전 | 0
답변 있음
Count the number of times a word appears?
A = {'fishX', 'fishY', 'fishZ', 'fishX', 'fishX'}'; B = [3 3 2 2 2]'; T = table(A, B); groupsummary(T, "A", 'sum')
Count the number of times a word appears?
A = {'fishX', 'fishY', 'fishZ', 'fishX', 'fishX'}'; B = [3 3 2 2 2]'; T = table(A, B); groupsummary(T, "A", 'sum')
3년 초과 전 | 1
답변 있음
how to recognize if an element of a cell array is a char vector
c = {'name', 'John Smith'; 'age', 32; 'children', cell(1,2)} cellfun(@ischar, c)
how to recognize if an element of a cell array is a char vector
c = {'name', 'John Smith'; 'age', 32; 'children', cell(1,2)} cellfun(@ischar, c)
3년 초과 전 | 0
| 수락됨
답변 있음
Creating a mesh in a 3-d plot.
clc, clear, close all opts = detectImportOptions('Data1.xlsx'); opts1 = detectImportOptions('Data2.xlsx'); % Load data ...
Creating a mesh in a 3-d plot.
clc, clear, close all opts = detectImportOptions('Data1.xlsx'); opts1 = detectImportOptions('Data2.xlsx'); % Load data ...
3년 초과 전 | 0
| 수락됨
답변 있음
Linear interpolation two array with target value in one array
Try this clc, clear A = [483, 427, 306, 195]; B = [0, 0.25, 0.5, 0.75]; % assume that these are your target values targ...
Linear interpolation two array with target value in one array
Try this clc, clear A = [483, 427, 306, 195]; B = [0, 0.25, 0.5, 0.75]; % assume that these are your target values targ...
3년 초과 전 | 0
답변 있음
I need help with converting hourly data to daily summation inside a cell
Note that the data type in the column date is char, not datetime. Try the following: clc, clear load('example.mat'); data...
I need help with converting hourly data to daily summation inside a cell
Note that the data type in the column date is char, not datetime. Try the following: clc, clear load('example.mat'); data...
3년 초과 전 | 1
| 수락됨
답변 있음
Struggling to create STFT form FFT
There are several open-source Matlab-based time-frequency toolboxes, which all provide implementations of the STFT. Check some o...
Struggling to create STFT form FFT
There are several open-source Matlab-based time-frequency toolboxes, which all provide implementations of the STFT. Check some o...
3년 초과 전 | 0
| 수락됨
답변 있음
Please help: ' Dimensions of arrays being concatenated are not consistent'
clc, clear d = load('Data.mat'); idx_lheel_start = find(strcmp(d.data_raw2(:, 2), '"Left Heel"')); idx_lheel_end = find(s...
Please help: ' Dimensions of arrays being concatenated are not consistent'
clc, clear d = load('Data.mat'); idx_lheel_start = find(strcmp(d.data_raw2(:, 2), '"Left Heel"')); idx_lheel_end = find(s...
3년 초과 전 | 0
| 수락됨
답변 있음
Finding Impulse response of LTI system when input signal and output are given.
Below is a code that estimates the impulse response with 3 equivalent approaches: clc, clear inpSig = [1 1 1]; outSig = [...
Finding Impulse response of LTI system when input signal and output are given.
Below is a code that estimates the impulse response with 3 equivalent approaches: clc, clear inpSig = [1 1 1]; outSig = [...
3년 초과 전 | 2
답변 있음
How to add a new array in the structure?
clc, clear vehicle.genset_model.drag = [4; 5; 6; 7; 8; 9; 10]; % save structure array in 'data.mat' save('data.mat', 'veh...
How to add a new array in the structure?
clc, clear vehicle.genset_model.drag = [4; 5; 6; 7; 8; 9; 10]; % save structure array in 'data.mat' save('data.mat', 'veh...
3년 초과 전 | 0
| 수락됨
또한 다음 목록에서 웹사이트를 선택하실 수도 있습니다.
미주
- América Latina (Español)
- Canada (English)
- United States (English)
유럽
- Belgium (English)
- Denmark (English)
- Deutschland (Deutsch)
- España (Español)
- Finland (English)
- France (Français)
- Ireland (English)
- Italia (Italiano)
- Luxembourg (English)
- Netherlands (English)
- Norway (English)
- Österreich (Deutsch)
- Portugal (English)
- Sweden (English)
- Switzerland
- United Kingdom(English)
아시아 태평양
- Australia (English)
- India (English)
- New Zealand (English)
- 中国
- 日本Japanese (日本語)
- 한국Korean (한국어)