I am using the ELECFREAKS IOT:bit Expansion Board with micro:bit to record data, it worked normally but in this week I tested again, and discover no data is uploaded to the channel ie.no entries in channel. The code in makecode are the same as before and the wifi is work, I cannot find the reason that cause this failure.
댓글 수: 4
시간 내림차순
Please share the code used on the device. We may be able to provide guidance based on looking at the code. Please replace any API keys in the code with API_KEY_PLACEHOLDER prior to sharing the code.
input.onButtonPressed(Button.A, function () {
if (ESP8266_IoT.wifiState(true)) {
basic.showIcon(IconNames.Yes)
basic.pause(1000)
} else {
basic.showIcon(IconNames.No)
basic.pause(1000)
}
})
input.onButtonPressed(Button.B, function () {
ESP8266_IoT.connectThingSpeak()
ESP8266_IoT.setData(
"API_KEY_PLACEHOLDER",
pins.analogReadPin(AnalogReadWritePin.P1),
Environment.ReadSoilHumidity(AnalogPin.P2)
)
ESP8266_IoT.uploadData()
basic.showIcon(IconNames.Heart)
if (ESP8266_IoT.thingSpeakState(true)) {
basic.showIcon(IconNames.Meh)
}
})
OLED.init(128, 64)
ESP8266_IoT.initWIFI(SerialPin.P8, SerialPin.P12, BaudRate.BaudRate115200)
ESP8266_IoT.connectWifi("your_ssid", "your_pwd")
basic.forever(function () {
OLED.writeStringNewLine("Light: " + pins.analogReadPin(AnalogReadWritePin.P1))
OLED.writeStringNewLine("Soil: " + Environment.ReadSoilHumidity(AnalogPin.P2))
if (pins.analogReadPin(AnalogReadWritePin.P1) < 300) {
pins.digitalWritePin(DigitalPin.P15, 1)
} else {
pins.digitalWritePin(DigitalPin.P15, 0)
}
if (Environment.ReadSoilHumidity(AnalogPin.P2) < 50) {
pins.servoWritePin(AnalogPin.P16, 0)
} else {
pins.servoWritePin(AnalogPin.P16, 180)
}
OLED.writeNumNewLine(Environment.ReadLightIntensity(AnalogPin.P1))
basic.pause(1000)
OLED.writeNumNewLine(Environment.ReadSoilHumidity(AnalogPin.P2))
basic.pause(1000)
})
This is the code that I use, I have checked that the connection with ThingSpeak is successful
I believe the library you are using is this one. It is not setting the requires headers, namely "Host". Without this, the request is being rejected by the server. Note that the "Host" header is required for valid HTTP/1.1 requests, per RFC 2616.
Please get in touch with the author of the library to update it. I have opened an issue in the original library for the authors to fix.
참여하려면 로그인하세요
