Configure Virtual Vehicle Scenario and Test
Use the Scenario and Test pane to configure your virtual vehicle test plan. The available options depend on the virtual vehicle Powertrain architecture and Model template parameter settings.
If you
set Scenario to Drive Cycle
, you can select:
Standard drive cycles from industry agencies and institutions. The default selection is the
FTP75
drive cycle. Certain drive cycles include gear shift schedules, for example,JC08
andCUEDC
.Wide open throttle (WOT) parameters, including nominal reference speed and simulation time.
To choose one or more existing drive cycles, click the Scenario and Test tab and follow these steps:
From Scenario, select
Drive Cycle
.From Drive cycle, select a drive cycle.
Click Add to Test Plan.
If you select Combined longitudinal and lateral vehicle
dynamics
(not applicable in this example), you can also choose from
several vehicle dynamics tests under Scenario:
Increasing Steer
Swept Sine
Sine with Dwell
Fishhook
For this example, use the default FTP75
drive cycle.