RF 및 혼성 신호
MATLAB® 및 Simulink® 제품은 높은 추상화 수준을 제공하여 엔지니어가 RF 및 혼성 신호 시스템을 통합 플랫폼에서 더 빠르게, 더 높은 충실도로 구현할 수 있도록 합니다. 엔지니어는 다음을 수행할 수 있습니다.
S-파라미터, 물리적 속성 또는 데이터시트 사양과 같은 측정 데이터를 사용하여 RF 및 안테나 소자, RF 트랜시버 및 프론트엔드, RF PCB를 모델링합니다.
ADC, DAC, PLL, 전력 컨버터 같은 아날로그 및 혼성 신호 성분이나 SerDes 시스템을 개발하고 고속 디지털 상호 연결용 IBIS-AMI 모델을 생성합니다.
패턴 왜곡을 생성 및 분석하고, 임피던스 불일치를 계산하고, RF 버짓 분석을 수행하고, S-파라미터 데이터를 피팅하고, 안테나 커버리지를 시각화합니다.
ISI, 지터, 잡음, 삽입 손실, 반사 손실, 누화의 영향을 관찰하고 채널이 IEEE 802.3, OIF, PCle, DDR과 같은 산업 표준을 준수하는지 확인합니다.
RF 및 혼성 신호 관련 제품
Antenna Toolbox
Design, analyze, and visualize antenna elements and antenna arrays
RF Toolbox
Design, model, and analyze networks of RF components
RF PCB Toolbox
Perform electromagnetic analysis of printed circuit boards
RF Blockset
Design and simulate RF systems
Mixed-Signal Blockset
Design, analyze, and simulate analog and mixed-signal systems
SerDes Toolbox
Design SerDes systems and generate PAMn IBIS-AMI models for high-speed digital interconnects
Signal Integrity Toolbox
Design, simulate, and analyze high-speed serial and parallel links
도움말 항목
안테나 및 RF 전파
- PCB Antenna for USB Dongle and BLE Applications (Antenna Toolbox)
Design and analyze a PCB antenna for USB dongle and BLE applications at 2.4 GHz. (R2022a 이후) - Infinite Array of Microstrip Patch Antenna on Teflon Substrate (Antenna Toolbox)
Model a probe-fed microstrip patch element used as a unit cell in an infinite array. - Urban Link and Coverage Analysis Using Ray Tracing (Antenna Toolbox)
Analyze communication links and coverage areas in an urban environment.
RF 필터 및 정합 회로 설계
- RF and Microwave Filter Modeling (RF Toolbox)
Model RF and microwave filters. - Designing Matching Networks in RF Systems (RF Toolbox)
Design and analyze a matching network for an RF system.
RF 시스템 및 트랜시버 설계
- RF System Design for Radar and Wireless Communications (RF Blockset)
Design an RF system for radar and wireless communication systems. - RF Transceiver Design (RF Blockset)
Design an RF transmitter and receiver. - RF Noise and Nonlinearity Simulations (RF Blockset)
Simulate RF noise and nonlinearities.
RF PCB 회로 설계 및 분석
- On-Chip Square Spiral Inductor for Si RFIC Application (RF PCB Toolbox)
Model and characterize an on-chip square spiral inductor. - Routing Discipline to Reduce Crosstalk (RF PCB Toolbox)
Analyze surface currents and follow routing discipline on a PCB trace.
데이터 변환기 및 PLL 설계
- Delta Sigma Modulator Data Converter with Half-Band Filter for Decimation (Mixed-Signal Blockset)
Use the delta sigma modulator data converter for an analog-to-digital converter application. - Tune Phase-Locked Loop Using Loop-Shaping Design (Mixed-Signal Blockset)
Tune the components of a passive loop filter to improve the loop bandwidth of a phase-locked loop system.
SerDes 시스템 설계 및 시뮬레이션
- Design SerDes System and Export IBIS-AMI Model (SerDes Toolbox)
Create and analyze a SerDes system, and export an IBIS-AMI model using the SerDes Designer app. - Design DDR5 IBIS-AMI Models to Support Back-Channel Link Training (SerDes Toolbox)
Create transmitter and receiver AMI models that support link training communication (back-channel). - DDR5 Controller Transmitter/Receiver IBIS-AMI Model (SerDes Toolbox)
Create a generic DDR5 controller transmitter and receiver IBIS-AMI model.
고속 직렬 링크 및 병렬 링크 분석
- Analyze Serial Links with Serial Link Designer (Signal Integrity Toolbox)
Configure and explore the design space of a serial link and analyze the waveforms. - Analyze Parallel Links with Parallel Link Designer (Signal Integrity Toolbox)
Configure and explore the design space of a parallel link and analyze the waveforms.




