Sense HAT

Raspberry Pi^®의 애드온 Sense HAT 보드 사용

Raspberry Pi의 Sense HAT 보드를 사용하고 제어합니다.

함수

`sensehat`	Create a Sense HAT object passing raspi object
`readHumidity`	Read the humidity value from the Humidity sensor
`readPressure`	Read the pressure value from the Air Pressure sensor
`readTemperature`	Read the temperature value from the Humidity sensor or the Air Pressure sensor
`readAngularVelocity`	Read angular velocity measured by the gyroscope along x, y, and z axes
`readAcceleration`	Read acceleration measured by the Accelerometer along x, y, and z axes
`readMagneticField`	Read the magnetic field measured by the Magnetometer along the x, y and z axis
`readJoystick`	Read the status of the joystick
`displayImage`	Display an image on the Raspberry Pi hardware or on the LED Matrix of SenseHAT
`writePixel`	Write the specified color to an individual pixel at the specified row and column of LED Matrix
`clearLEDMatrix`	Clears the entire LED matrix and sets the all the pixels to blank ([0, 0, 0])
`displayMessage`	Scrolls a text message across the LED Matrix

객체

raspi Connection to Raspberry Pi board

추천 예제

Working with Raspberry Pi SenseHAT

Read the sensor values, read the position of joystick and control the LED Matrix on Raspberry Pi® Sense HAT using MATLAB® Support Package for Raspberry Pi Hardware.

스크립트 열기

Auto Rotate LED Matrix Display

Use MATLAB® to read the accelerometer on the Raspberry Pi® Sense HAT and control the rotation of the image displayed on the LED matrix.

스크립트 열기

Transfer Data over TCP/IP Between Raspberry Pi Sense HAT and Android Device

Use MATLAB® commands to send data over TCP/IP from Raspberry Pi® Sense HAT to an Android™ device and also receive RGB color values from the Android device and display the same on the LED matrix of Sense HAT.

스크립트 열기