Control System Toolbox™에는 동적 시스템 모델을 리샘플링하거나 연속시간 영역과 이산시간 영역 간에 변환하는 명령이 있습니다.
라이브 편집기 작업
|모델 레이트 변환
|연속시간 모델과 이산시간 모델 간에 변환 및 라이브 편집기에서 모델 리샘플링
- Discretizing and Resampling Models
This example shows how to use the commands for continuous/discrete, discrete/continuous, and discrete/discrete conversions.
- Discretize a Compensator
This example shows how to convert a compensator from continuous to discrete time using several discretization methods, to identify a method that yields a good match in the frequency domain.
- Discretizing a Notch Filter
This example shows the comparison of several techniques for discretizing a notch filter.
- Improve Accuracy of Discretized System with Time Delay
This example shows how to improve the frequency-domain accuracy of a system with a time delay that is a fractional multiple of the sample time.
- Convert Discrete-Time System to Continuous Time
This example shows how to convert a discrete-time system to continuous time using
d2c, and compare the results using two different interpolation methods.
- Continuous-Discrete Conversion Methods
Choose discretization and interpolation methods for converting between continuous and discrete models.
- Upsample Discrete-Time System
This example shows how to upsample a system using both the
upsamplecommands and compare the results of both to the original system.
- Choosing a Resampling Command
Use resampling commands to change the sample time of a discrete-time system.