테스트 및 측정
5G Toolbox™는 파형 생성 기능과 분석 기능을 제공합니다.
프로그래밍 방식으로 또는 5G 파형 생성기 앱을 사용하여 업링크 파형, 다운링크 파형, 사이드링크 파형, 테스트 모델, FRC를 생성하고 손상을 추가하고 시각화합니다.
파형 품질을 분석하고 메트릭을 가져옵니다. 예를 들어 EVM(오류 벡터 크기)과 ACLR(인접 채널 누설비)을 측정하고 CSI-RS(채널 상태 정보 기준 신호)를 기반으로 품질 메트릭을 가져올 수 있습니다.
CA(반송파 결합) 수행: 다중 5G NR 반송파를 생성, 집계 및 복조합니다.
앱
함수
nrWaveformGenerator | Generate 5G NR waveform |
nrDLCarrierConfig | 5G downlink waveform configuration parameters |
nrSCSCarrierConfig | 5G 파형 생성을 위한 SCS 반송파 구성 파라미터 |
nrWavegenBWPConfig | BWP configuration parameters for 5G waveform generation |
nrWavegenSSBurstConfig | SS burst configuration parameters for 5G waveform generation |
nrWavegenPDSCHConfig | PDSCH configuration parameters for 5G waveform generation |
nrPDSCHDMRSConfig | PDSCH DM-RS configuration parameters |
nrPDSCHPTRSConfig | PDSCH PT-RS configuration parameters |
nrCORESETConfig | Control resource set (CORESET) configuration parameters |
nrSearchSpaceConfig | Search space set configuration parameters |
nrWavegenPDCCHConfig | PDCCH configuration parameters for 5G waveform generation |
nrWavegenCSIRSConfig | CSI-RS configuration parameters for 5G waveform generation |
nrWaveformGenerator | Generate 5G NR waveform |
nrULCarrierConfig | 5G uplink waveform configuration parameters (R2021a 이후) |
nrSCSCarrierConfig | 5G 파형 생성을 위한 SCS 반송파 구성 파라미터 |
nrWavegenBWPConfig | BWP configuration parameters for 5G waveform generation |
nrIntraCellGuardBandsConfig | Intracell guard bands configuration parameters (R2023b 이후) |
nrWavegenPUSCHConfig | PUSCH configuration parameters for 5G waveform generation (R2021a 이후) |
nrPUSCHDMRSConfig | PUSCH DM-RS configuration parameters |
nrPUSCHPTRSConfig | PUSCH PT-RS configuration parameters |
nrWavegenPUCCH0Config | PUCCH format 0 configuration parameters for 5G waveform generation (R2021b 이후) |
nrWavegenPUCCH1Config | PUCCH format 1 configuration parameters for 5G waveform generation (R2021b 이후) |
nrWavegenPUCCH2Config | PUCCH format 2 configuration parameters for 5G waveform generation (R2021b 이후) |
nrWavegenPUCCH3Config | PUCCH format 3 configuration parameters for 5G waveform generation (R2021b 이후) |
nrWavegenPUCCH4Config | PUCCH format 4 configuration parameters for 5G waveform generation (R2021b 이후) |
nrWavegenSRSConfig | SRS configuration parameters for 5G waveform generation (R2021a 이후) |
nrORANBlockCompress | O-RAN fronthaul block compression (R2022b 이후) |
nrORANBlockDecompress | O-RAN fronthaul block decompression (R2022b 이후) |
nrCSIRSMeasurements | CSI-RS-based physical layer measurements (R2022b 이후) |
nrSSBMeasurements | SSB-based physical layer measurements (R2022b 이후) |
nrEVM | Measure error vector magnitude (EVM) (R2025a 이후) |
도움말 항목
- 5G NR 파형 생성
5G NR 파형 생성 워크플로와 생성 가능한 파형 유형에 대한 개요를 제공합니다.
추천 예제
5G NR Downlink Vector Waveform Generation
Create mixed numerology DL waveforms containing SS burst, PDSCH, PDCCH, and CSI-RS.
5G NR Uplink Vector Waveform Generation
Create mixed numerology UL waveforms containing PUSCH, PUCCH, and SRS.
5G NR Uplink with PUCCH Vector Waveform Generation
Create mixed numerology UL waveforms containing PUSCH, PUCCH, and SRS.
5G NR-TM and FRC Waveform Generation
Use MATLAB® code to generate standard-compliant 5G NR test models, downlink FRCs, and uplink FRCs for FR1 and FR2.
NR Sidelink Vector Waveform Generation
Generate 5G NR V2X PSCCH and PSSCH, including SCI and SL-SCH transport channel coding.
- R2024b 이후
- 라이브 스크립트 열기
App-Based 5G Waveform Analysis
Use the 5G Waveform Analyzer app to analyze and visualize imported or captured 5G waveforms and export analysis results.
- R2024b 이후
EVM Measurement of 5G NR Downlink Waveforms with RF Impairments
Measure EVM of NR-TM or NR-FRC waveforms with phase noise and memoryless nonlinearity impairments.
EVM Measurement of 5G NR PUSCH Waveforms
Measure EVM of PUSCH FRC waveforms with phase noise and memoryless nonlinearity impairments.
5G NR Downlink Carrier Aggregation, Demodulation, and Analysis
Generate, aggregate, and demodulate multiple 5G NR downlink carriers.
ACS Test Waveform Generation for 5G NR Receiver Testing
Generate waveform for ACS receiver test, as defined in TS 38.141-1, Section 7.4.1.
- R2024b 이후
- 라이브 스크립트 열기
Dynamic Spectrum Sharing for 5G NR and LTE Coexistence
Generate coexisting LTE and 5G NR waveforms for dynamic spectrum sharing.
5G NR Waveform Acquisition and Analysis
Transmit and capture generated 5G NR waveform over the air using instruments.
5G NR Waveform Capture and Analysis Using Software-Defined Radio
Generate and transmit a 5G NR waveform continuously over the air using a supported software-defined radio.
Generate CU-Plane Messages for O-RAN Fronthaul Test
Generate fronthaul control plane and user plane (CU-Plane) messages for O-RAN conformance tests, as defined in TS O-RAN.WG4.CONF.
Analyze CU-Plane Messages for O-RAN Fronthaul Testing
Analyze the contents of a PCAP file containing O-RAN messages sent on the fronthaul CU-Planes between an O-DU and an O-RU.
- R2024a 이후
- 라이브 스크립트 열기
MATLAB Command
You clicked a link that corresponds to this MATLAB command:
Run the command by entering it in the MATLAB Command Window. Web browsers do not support MATLAB commands.
웹사이트 선택
번역된 콘텐츠를 보고 지역별 이벤트와 혜택을 살펴보려면 웹사이트를 선택하십시오. 현재 계신 지역에 따라 다음 웹사이트를 권장합니다:
또한 다음 목록에서 웹사이트를 선택하실 수도 있습니다.
사이트 성능 최적화 방법
최고의 사이트 성능을 위해 중국 사이트(중국어 또는 영어)를 선택하십시오. 현재 계신 지역에서는 다른 국가의 MathWorks 사이트 방문이 최적화되지 않았습니다.
미주
- América Latina (Español)
- Canada (English)
- United States (English)
유럽
- Belgium (English)
- Denmark (English)
- Deutschland (Deutsch)
- España (Español)
- Finland (English)
- France (Français)
- Ireland (English)
- Italia (Italiano)
- Luxembourg (English)
- Netherlands (English)
- Norway (English)
- Österreich (Deutsch)
- Portugal (English)
- Sweden (English)
- Switzerland
- United Kingdom (English)

















