Feeds
제출됨
Drawworks Electro-Mechanical Simulation for Oil/Gas Drilling
Includes two model fidelities for simulating a drawworks system for drilling applications.
4개월 전 | 다운로드 수: 12 |
제출됨
Model-based Design for Solar Power Control with TI Hardware
Solar inverter demo with maximum power point tracking (MPPT) control deployed to a Texas Instruments C2000 Piccolo™ MCU
6개월 전 | 다운로드 수: 13 |
제출됨
Analyzing the Sun's Path
Solar Position Tracking and the Analemma Phenomenon
4년 초과 전 | 다운로드 수: 4 |
제출됨
Grid Code Compliance for Renewable Resource Integration
Use MATLAB/Simulink to evaluate Grid Code Compliance, such as IEEE 1547
4년 초과 전 | 다운로드 수: 32 |
제출됨
Microgrid Energy Management System (EMS) using Optimization
Online optimization of energy storage actions in a microgrid given system constraints and pricing
4년 초과 전 | 다운로드 수: 177 |
답변 있음
How do I combine multiple plots in a for loop?
Add “hold on” prior to your for-loop. Adding a "hold on" command means that anything that you plot will not clear the existing...
How do I combine multiple plots in a for loop?
Add “hold on” prior to your for-loop. Adding a "hold on" command means that anything that you plot will not clear the existing...
거의 6년 전 | 4
| 수락됨
제출됨
Systems-Level Microgrid Simulation from Simple One-Line Diagram
Example simple Microgrid with library of PQ-based Renewables and Diesel GenSets.
6년 초과 전 | 다운로드 수: 115 |
답변 있음
op-amp inverter on simulink
I took a look at the example model that you attached to your question. I saw what you mean by the square pulse does not start at...
op-amp inverter on simulink
I took a look at the example model that you attached to your question. I saw what you mean by the square pulse does not start at...
9년 초과 전 | 1
답변 있음
Help on gmdistributionfit toolbox
When you plot the |gmdistribution| fit results, did you remember to pass in both the x and y arguments to the |plot| function? ...
Help on gmdistributionfit toolbox
When you plot the |gmdistribution| fit results, did you remember to pass in both the x and y arguments to the |plot| function? ...
거의 11년 전 | 0
답변 있음
why am I getting this linprog error ?
You should check the dimensions of both your 'f' vector and your 'Aeq' matrix. Both of these values are multiplied with the vect...
why am I getting this linprog error ?
You should check the dimensions of both your 'f' vector and your 'Aeq' matrix. Both of these values are multiplied with the vect...
거의 11년 전 | 0
답변 있음
The Integration of Gaussian PDF to obtain the CDF why don’t I get the correct answer?
After reviewing your code, I was able to figure out what was troubling you. The flow of your code and equations are all correct,...
The Integration of Gaussian PDF to obtain the CDF why don’t I get the correct answer?
After reviewing your code, I was able to figure out what was troubling you. The flow of your code and equations are all correct,...
거의 11년 전 | 1
| 수락됨
답변 있음
How do I pass variables from one GUI to another
You can use the |<http://www.mathworks.com/help/matlab/ref/setappdata.html setappdata>| and |<http://www.mathworks.com/help/matl...
How do I pass variables from one GUI to another
You can use the |<http://www.mathworks.com/help/matlab/ref/setappdata.html setappdata>| and |<http://www.mathworks.com/help/matl...
거의 11년 전 | 13
| 수락됨
답변 있음
Look-up table with changing table
From what you are describing as requirements, you are correct that you need to use the <http://www.mathworks.com/help/simulink/s...
Look-up table with changing table
From what you are describing as requirements, you are correct that you need to use the <http://www.mathworks.com/help/simulink/s...
거의 11년 전 | 2
| 수락됨
답변 있음
to find rise time, settling time, overshoot, steady-state error by a model generated in Simulink ?
I am assuming that you're already providing a step input to your Simulink model via the <http://www.mathworks.com/help/simulink/...
to find rise time, settling time, overshoot, steady-state error by a model generated in Simulink ?
I am assuming that you're already providing a step input to your Simulink model via the <http://www.mathworks.com/help/simulink/...
거의 11년 전 | 0
답변 있음
Fitting exponential function, coefficients and errors
You have quite a few options that you might want to check out to improve your exponential fit! As an option within the |fit| fun...
Fitting exponential function, coefficients and errors
You have quite a few options that you might want to check out to improve your exponential fit! As an option within the |fit| fun...
거의 11년 전 | 0
| 수락됨
답변 있음
How can i open SimPowersystems library in R2013b?
The Simulink component library, SimPowerSystems, is an additional package for use in the Simscape environment. You can check the...
How can i open SimPowersystems library in R2013b?
The Simulink component library, SimPowerSystems, is an additional package for use in the Simscape environment. You can check the...
거의 11년 전 | 0
| 수락됨
답변 있음
Need help using ODE45 and eulers function
It looks to me that you're nearly there! I found a couple of small mistakes that seems to be holding you back. Changes to you...
Need help using ODE45 and eulers function
It looks to me that you're nearly there! I found a couple of small mistakes that seems to be holding you back. Changes to you...
거의 11년 전 | 2
답변 있음
how to update the value of a transfer function block during run time of simulation
Here is a link to some documentation that details several different methods in Simulink to achieve what you're looking for: *...
how to update the value of a transfer function block during run time of simulation
Here is a link to some documentation that details several different methods in Simulink to achieve what you're looking for: *...
거의 11년 전 | 0
답변 있음
Find Triggered subsystem in a simulink model
One potential method would be to generate a list of all the blocks in your Simulink model, and then find blocks which are of the...
Find Triggered subsystem in a simulink model
One potential method would be to generate a list of all the blocks in your Simulink model, and then find blocks which are of the...
거의 11년 전 | 0
| 수락됨
답변 있음
How to set y-axes intercept
You can set the limits of the x-axis directly using the |<http://www.mathworks.com/help/matlab/ref/xlim.html xlim>| function. If...
How to set y-axes intercept
You can set the limits of the x-axis directly using the |<http://www.mathworks.com/help/matlab/ref/xlim.html xlim>| function. If...
대략 11년 전 | 0
| 수락됨
답변 있음
How can I perform a K-means cluster analysis of the data inside a cell array?
The documentation of the |<http://www.mathworks.com/help/stats/kmeans.html kmeans>| function that you are trying to use requires...
How can I perform a K-means cluster analysis of the data inside a cell array?
The documentation of the |<http://www.mathworks.com/help/stats/kmeans.html kmeans>| function that you are trying to use requires...
대략 11년 전 | 0
| 수락됨
답변 있음
Define colormap according to certain variable.
You can define a colormap using the |<http://www.mathworks.com/help/matlab/ref/colormap.html hsv>| function and then define the ...
Define colormap according to certain variable.
You can define a colormap using the |<http://www.mathworks.com/help/matlab/ref/colormap.html hsv>| function and then define the ...
대략 11년 전 | 1
답변 있음
Comparison between two stairs graphs
Since you're interested in the values of the empirical CDF curves, you could use the |ecdf| function as opposed to |cdfplot|. Th...
Comparison between two stairs graphs
Since you're interested in the values of the empirical CDF curves, you could use the |ecdf| function as opposed to |cdfplot|. Th...
대략 11년 전 | 0
답변 있음
Estimation of parameters for a non-linear model
If you're using MATLAB 2011b or newer, you likely have access to the <http://www.mathworks.com/help/curvefit/interactive-curve-a...
Estimation of parameters for a non-linear model
If you're using MATLAB 2011b or newer, you likely have access to the <http://www.mathworks.com/help/curvefit/interactive-curve-a...
대략 11년 전 | 0
| 수락됨
답변 있음
How to put a title on a colorbar?
Using the handle for the colorbar (in your case, the variable hcb), you can locate the colorbar handle title using the |get| fun...
How to put a title on a colorbar?
Using the handle for the colorbar (in your case, the variable hcb), you can locate the colorbar handle title using the |get| fun...
대략 11년 전 | 3
| 수락됨
문제를 풀었습니다
Find the two most distant points
Given a collection of points, return the indices of the rows that contain the two points most distant from one another. The inpu...
대략 11년 전
문제를 풀었습니다
Indexed Probability Table
This question was inspired by a Stack Overflow question forwarded to me by Matt Simoneau. Given a vector x, make an indexed pro...
대략 11년 전
답변 있음
Poker bar graph, probability
An interesting problem for sure, as there are many methods through which you could tackle this problem. If you're relatively new...
Poker bar graph, probability
An interesting problem for sure, as there are many methods through which you could tackle this problem. If you're relatively new...
대략 11년 전 | 1
| 수락됨
문제를 풀었습니다
Sums with Excluded Digits
Add all the integers from 1 to n in which the digit m does not appear. m will always be a single digit integer from 0 to 9. no...
대략 11년 전
문제를 풀었습니다
Remove all the words that end with "ain"
Given the string s1, return the string s2 with the target characters removed. For example, given s1 = 'the main event' your ...
대략 11년 전