James
Techsource Systems
2011년부터 활동
Followers: 0 Following: 0
Professional Interests: Control Systems, Physical Modeling, Robotics
Feeds
제출됨
Separate Digits from a single number in Simulink
Separate Digits from a single number in Simulink
대략 9년 전 | 다운로드 수: 1 |
제출됨
Decimal to Binary converter (Configurable)
Convert Decimal to Binary number up to 4 bits
대략 9년 전 | 다운로드 수: 6 |
질문
How do I create tabs for codes already generated using GUIDE?
I've used Matlab GUIDE to construct a GUI and its automated callback functions. I would like to separate them into tabs, how...
9년 초과 전 | 답변 수: 0 | 0
0
답변답변 있음
how to mate pin with a curved slot ?- Simmechanics
An example model here: http://www.mathworks.com/matlabcentral/fileexchange/50651-cam-gear-actuated-lever
how to mate pin with a curved slot ?- Simmechanics
An example model here: http://www.mathworks.com/matlabcentral/fileexchange/50651-cam-gear-actuated-lever
9년 초과 전 | 0
| 수락됨
질문
how to mate pin with a curved slot ?- Simmechanics
<</matlabcentral/answers/uploaded_files/27244/Picture1.png>> Hi all, I would like to mate the lever (with a pin) to the curve...
9년 초과 전 | 답변 수: 1 | 0
1
답변제출됨
Building Simscape Model from Matlab Codes
Building Simscape model from Matlab codes.
거의 10년 전 | 다운로드 수: 2 |
제출됨
Power Window control using Arduino motor shield R3
A simple Simulink model to control a self made Power Window
거의 10년 전 | 다운로드 수: 1 |
제출됨
CCS Installation preparation procedures on TI DM6437EVM
Procedures for software installation for implementation in DM6437 EVM
대략 10년 전 | 다운로드 수: 4 |
제출됨
Simple Hydraulic System2
A simple model that highlights the effects of changing various parameters in a hydraulic system.
거의 12년 전 | 다운로드 수: 3 |
제출됨
Simple Hydraulic System
A simple getting started SimHydraulics model with 2 pistons and an oil pipe connecting them.
대략 12년 전 | 다운로드 수: 3 |
제출됨
Trip to McDonalds
Calculates Cost of burgers lost if customers are served above 3 minutes.
대략 12년 전 | 다운로드 수: 1 |
답변 있음
Getting "Counter" Simulink block to switch direction?
Hope to get and answer for this too. I manage read the angular velocity from pulse reading but am stuck on how to detect direct...
Getting "Counter" Simulink block to switch direction?
Hope to get and answer for this too. I manage read the angular velocity from pulse reading but am stuck on how to detect direct...
12년 초과 전 | 0
제출됨
xPC target USB camera
Displays video from USB camera connected to target PC.
거의 13년 전 | 다운로드 수: 1 |
질문
RTWT Not running real time
Hi, I ran a demo 'Real time vander pol simulation' (type 'rtvdp' on command prompt) on my desktop PC. However, after buildin...
대략 13년 전 | 답변 수: 0 | 0
0
답변답변 있음
xpctarget ping fails
Additional info: For both PCs I can ping from the DOS environment. Crossover cable is used. Direct connection between host and...
xpctarget ping fails
Additional info: For both PCs I can ping from the DOS environment. Crossover cable is used. Direct connection between host and...
대략 13년 전 | 0
질문
xpctarget ping fails
Hi, I have 2 target PCs - T1 and T2. I configured 'xpcexplr' and boot both PCs. (all configurations are the same but only ...
대략 13년 전 | 답변 수: 3 | 0
3
답변질문
Host target Communication lost once target PC is booted into the xPC environment
Hi all, The communication between my host and target PC is lost everytime I boot the target PC into the xPC environment. I'v...
대략 13년 전 | 답변 수: 3 | 0
3
답변답변 있음
Turning on grid on ltiviewer
Got it. Need to add 'on' after grid. For bode diagram the command 'grid' is executed twice. Hence, it's turned off. obj = f...
Turning on grid on ltiviewer
Got it. Need to add 'on' after grid. For bode diagram the command 'grid' is executed twice. Hence, it's turned off. obj = f...
13년 초과 전 | 0
답변 있음
Turning on grid on ltiviewer
Hi guys, I found a way but still not the best. The grid for Bode diagram is not displayed. Here's what I did; obj = findob...
Turning on grid on ltiviewer
Hi guys, I found a way but still not the best. The grid for Bode diagram is not displayed. Here's what I did; obj = findob...
13년 초과 전 | 0
질문
Turning on grid on ltiviewer
Hi everyone, I displayed 2 systems using ltiview as shown below: load ltiexamples ltiview({'step';'bode';'impulse';'nicho...
13년 초과 전 | 답변 수: 5 | 0
5
답변질문
Error when running HEV model
Hi, I downloaded and tried running a HEV model from here: http://www.mathworks.com/matlabcentral/fileexchange/28441-hybrid-...
13년 초과 전 | 답변 수: 1 | 0