Developing DC-DC Converter Control in Simulink

버전 23.1.0 (46.8 MB) 작성자: Vasco Lenzi
Model-Based Design of a DCDC Converter using Simulink, Simscape and Stateflow
다운로드 수: 5.6K
업데이트 날짜: 2024/1/3
This workflow reference covers the design, analysis, and software development for a Single Ended Primary Inductor Converter, commonly known as SEPIC, which is powered by a 12 Volt lithium-ion battery and is converting voltage to 18 Volt to power 36 LEDs divided in 6 module with each 6 LEDs in series. The developed software include a simplified BMS (battery management system) to watch over the battery status, supervisory logic to coordinate mode of operation and two closed-loop controllers (SEPIC voltage and LEDs current).
Prerequisites and related content:
This content has been presented in a webinar, you can take a look for further explanations:
It is strongly reccomended to complete following free Onramps before taking a look at the material (in this order):
The onramps are interactive, self-paced tutorial (around 2 hours length). It would be really beneficial to attend following (paid) trainings relevant to this topic:
Project details:
This project has been deveoped around a Texas instrument LED kit (codename: TMDSDCDCLEDKIT). It uses a F28069 ControlCard.
This application is interesting because:
  • The SEPIC is using medium to high switching frequency (100 kHz)
  • LEDs are current controlled using 20 kHz switching.
  • Filter design plays an important role in getting current and voltage signals as proper inputs to the controllers
Both controllers are PI controllers which were modeled, simulated tuned and verified within the Simulink platform. Because the converter was modeled appropriately, the PI parameters derived in simulation can be used directly on hardware with good results.
Workflow
This demo covers a typical power electronics development workflow, divided in 5 sections:
System Modeling: Model the converter and calculate the most efficient operating region
Thermal Analysis: Determine power losses and the thermal behavior of the converter
Control Design and Tuning: Design control algorithm based on time/frequency domain specification
Logic Design, Verification and Verification: Design supervisory logic and implement unit testing
Embedded Code Generation: Implement power electronic controls on an embedded platform
Past releases:
See "Version History" tab in this entry

인용 양식

Vasco Lenzi (2024). Developing DC-DC Converter Control in Simulink (https://github.com/mathworks/model-based-design-dc-dc-converter/releases/tag/23.1.0), GitHub. 검색됨 .

MATLAB 릴리스 호환 정보
개발 환경: R2023b
R2023b와 호환
플랫폼 호환성
Windows macOS Linux
카테고리
Help CenterMATLAB Answers에서 Electrical Block Libraries에 대해 자세히 알아보기
커뮤니티
 Power Electronics Control 커뮤니티에 더 많은 파일이 있습니다

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!
버전 게시됨 릴리스 정보
23.1.0

See release notes for this release on GitHub: https://github.com/mathworks/model-based-design-dc-dc-converter/releases/tag/23.1.0

21.1.0

See release notes for this release on GitHub: https://github.com/mathworks/model-based-design-dc-dc-converter/releases/tag/21.1.0

1.2.0

See release notes for this release on GitHub: https://github.com/mathworks/model-based-design-dc-dc-converter/releases/tag/1.2.0

1.1.0

Added work folder for Simulink Cache files

1.0.0

이 GitHub 애드온의 문제를 보거나 보고하려면 GitHub 리포지토리로 가십시오.
이 GitHub 애드온의 문제를 보거나 보고하려면 GitHub 리포지토리로 가십시오.