can not upload data to thingspeak even while the data is displaying in serial moniter
조회 수: 10 (최근 30일)
이전 댓글 표시
#include <ESP8266WiFi.h>
#include <DHT.h>
#include <WiFiClient.h>
#include <ESP8266WebServer.h>
String apiKey = "AAABBBCCCDDD"; // Enter your Write API key from ThingSpeak
const char *ssid = "Mattath-Fi"; // replace with your wifi ssid and wpa2 key
const char *pass = "12345678";
const char* server = "api.thingspeak.com";
#define DHTPIN 0 //pin where the dht11 is connected
DHT dht(DHTPIN, DHT11);
WiFiClient client;
void setup()
{
Serial.begin(115200);
delay(10);
dht.begin();
Serial.println("Connecting to ");
Serial.println(ssid);
WiFi.begin(ssid, pass);
while (WiFi.status() != WL_CONNECTED)
{
delay(500);
Serial.print(".");
}
Serial.println("");
Serial.println("WiFi connected");
}
void loop()
{
float h = dht.readHumidity();
float t = dht.readTemperature();
if (isnan(h) || isnan(t))
{
Serial.println("Failed to read from Sensors!");
return;
}
if (client.connect(server,80)) // "184.106.153.149" or api.thingspeak.com
{
String postStr = apiKey;
postStr +="&field1=";
postStr += String(t);
postStr +="&field2=";
postStr += String(h);
postStr += "\r\n\r\n";
client.print("POST /update HTTP/1.1\n");
client.print("Host: api.thingspeak.com\n");
client.print("Connection: close\n");
client.print("X-THINGSPEAKAPIKEY: "+apiKey+"\n");
client.print("Content-Type: application/x-www-form-urlencoded\n");
client.print("Content-Length: ");
client.print(postStr.length());
client.print("\n\n");
client.print(postStr);
Serial.print("Temperature: ");
Serial.print(t);
Serial.print(" degrees Celcius, Humidity: ");
Serial.print(h);
Serial.println("%. Send to Thingspeak.");
}
client.stop();
Serial.println("Waiting...");
delay(1000);
}
댓글 수: 0
답변 (1개)
Christopher Stapels
2021년 3월 9일
What are you seeing on the serial monitor?
I think the problem is that you are stopping the client before the server acknowleges the post. You could add delay before disconencting, or wait for a response.
We strongly reccomend using the ThingSpeak library by the way. It takes care of all the HTTP interactions and waiting for you.
댓글 수: 8
Ayesha Fatima
2021년 4월 23일
I added the thingspeak libraries and also changed delay as 30sec which was 10 at first. but still the parameters are not being posted on thingspeak
Christopher Stapels
2021년 4월 23일
@Ayesha Fatima perhaps you culd start a new post/thread so we can help you? I would describe what you are trying to do, what you have tried, and what you see.
커뮤니티
더 많은 답변 보기: ThingSpeak 커뮤니티
참고 항목
카테고리
Help Center 및 File Exchange에서 REST API에 대해 자세히 알아보기
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!