Fail to create a ROS publisher/ subcriber for individual project

조회 수: 25 (최근 30일)
Van Chuong Nguyen
Van Chuong Nguyen 2021년 2월 5일
편집: Josh Chen 2021년 2월 5일
Hi,
I followed https://www.mathworks.com/help/ros/ug/communicate-with-the-turtlebot.html , and applied this idea to my specific project in my robot, not to the Turtlebot.
Basically, I have my own ROS project, and successfully built it in the Virtual Machine- Ubuntu-Gazebo 9.
After I used roslaunch to start my own project in VM, and in the Matlab I used rosinit(ipaddress) to successfully intialized Matlab global node and connected with ROS master,
and I successfuly got the names of all rostopic by using the command rostopic list in Matlab command window.
---------------------------------------------------------------------------
Now, I am trying to create a new publisher in Matlab to publish information to one topic (name as /mytopic, for example) in my own ROS project by using command: Matlab_Pub = rospublisher("/mytopic").
But I got an error: Failed to create a ROS publisher with topic name /mytopic and message type mytopic_msgs/MotorCmd.
----------------------------------------------------------------------------
And I also got the same issue when trying to creat a new subscriber in Matlab to subscribe to one topic in my own ROS project: Matlab_Sub = rossubscriber("/mytopic")
Could you please give me some insight on this issue and how to fix them?
Thank you so much for your help!
  댓글 수: 2
Josh Chen
Josh Chen 2021년 2월 5일
Hello Van,
Can you please share more details about project? From the error message it looks like something was missing.
  1. What is this "mytopic_msgs/MotorCmd"? Is it a custom message? If yes, have you created a custom message using rosgenmsg?
  2. Instead of rosinit(ipaddress), if you do "rosinit", and then create such publisher or subscriber, would that work?
  3. Is this a message already existed in the network? (e.g. published from or subscribed by a node in your virtual machine)
Josh
Van Chuong Nguyen
Van Chuong Nguyen 2021년 2월 5일
편집: Van Chuong Nguyen 2021년 2월 5일
Thanks Josh, so I have some thoughts
3. Is this a message already existed in the network? (e.g. published from or subscribed by a node in your virtual machine)
==> Yes, this message is already existed in my VM. I can run the project separately in the VM, without Matlab in host computer. But now I want to use Matlab to connect with my ROS project in VM, writing some codes in Matlab to control the robot in the Gazebo.
2. Instead of rosinit(ipaddress), if you do "rosinit", and then create such publisher or subscriber, would that work?
==> After I do "rosinit", and type: Matlab_Pub = rospublisher("/mytopic"), It shows that "Cannot determine the message type of the /mytopic topic. Either the topic is not registered with the ROS master, or the ROS master is not reachable". ==> It looks like I need to set up the the ROS network in Matlab first before doing the rospublisher?
1. What is this "mytopic_msgs/MotorCmd"? Is it a custom message? If yes, have you created a custom message using rosgenmsg?
==> So it is a type of message in my ROS project in VM. I have not created any message using rosgenms. Btw, could you please let me know what does a custom message you mentioned mean? and why/ how/ is it neccessary we use that for my specific project?
Since I am new to the ROS toolbox, and not sure the way to do it properly, so your advice would be really helpful!
Thank you

댓글을 달려면 로그인하십시오.

채택된 답변

Josh Chen
Josh Chen 2021년 2월 5일
편집: Josh Chen 2021년 2월 5일
Hi Van,
Based on your reply, it did seem that you are missing custom message definition in MATLAB. So MATLAB has a set of predefined ROS messages (e.g. std_msgs/Float64) that you can directly use for publisher and subscriber. a full list of those predefined messages can be seen by typing in
>> rosmsg list
However, in this case, when you tried to publish or subscribe to a topic that has a message which does not shipped with MATLAB, MATLAB needs more information about such message. Once you provide the message definition files (*.msg) and run the rosgenmsg, you should be able to see it in the rosmsg list. After that, you should be able to use that message for publisher and subscriber.
Here you can find more about ROS custom message and here is a documentation page showing an example of generating a custom message in MATLAB.
Hope this helps,
Josh
  댓글 수: 2
Van Chuong Nguyen
Van Chuong Nguyen 2021년 2월 5일
Hi Josh,
It looks there are a lot of thing I still need to do.
1) So I wonder if the custom message that I need to create should has same type with the message of /mytopic that already exists in my ROS project?
2) And could you please give me some main steps that I should follow to make sure I can use Matlab to control the robot in my existing ROS project?
Thank you.
Josh Chen
Josh Chen 2021년 2월 5일
편집: Josh Chen 2021년 2월 5일
Hello Van,
Yes, that is correct, the custom message should be the same type with the message of /mytopic. You can probably copy the message definition files from your project.
I would suggest to:
  • play around the doc example and make sure you are able to generate the custom message as shown in the example
  • copy your custom message and generate them following the same way you did before (make sure it shows up in >> rosmsg list)
  • then have fun using publisher and subscriber. :)
Josh

댓글을 달려면 로그인하십시오.

추가 답변 (0개)

카테고리

Help CenterFile Exchange에서 Network Connection and Exploration에 대해 자세히 알아보기

제품


릴리스

R2020b

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by