# Thermal Conductivity varying with input temperature

조회 수: 12(최근 30일)
Aled 2020년 12월 6일
댓글: Aled 2020년 12월 9일
Hi all,
I'm trying to create a thermal conduction block to use in a simscape model for a cylindrical pipe, therefore the fourier law equation will be in cylindrical and not for a flat plate. I also want to use the input temperature at port A to calculate thermal conductivity from an equation based on the material properties.
The block has been modified from simscape standard 'branch' and 'conduction' models.
I have put the thermal conductivity 'th_cond' as a variable and an equation has been used to calculate the thermal conductivity.
When i try and build the simscape library usin the 'ssc_build' command i get the following error. Any help would be appreciated
Failed to generate 'pipe_model_lib'
Caused by:
Error using pipe_model.conductionpipe_SSteel>equations (line 32)
Type mismatch for equation. The left hand side of the equation is {[1x1 double],
'W/(m*K)'} and the right hand side of the equation is 35.
th_cond = {[1x1 double], 'W/(m*K)'}

댓글을 달려면 로그인하십시오.

### 답변(1개)

Juan Sagarduy 2020년 12월 8일
Hi Alex
An easy way to solve this by defining the equation: th_cond == a+b*T1.
Parameters a and b shall be defined with a consistent unit: a[mW/(m*K)] and b[mW/(m*K^2)].
Then it should be alright. You can even make a and b protected parameters.
Br Juan
##### 댓글 수: 1표시숨기기 없음
Aled 2020년 12월 9일
Thanks Juan, the error is now gone :)

댓글을 달려면 로그인하십시오.

### Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by