MVDR fail with two identical target.

조회 수: 6 (최근 30일)
zohar
zohar 2013년 2월 13일
Hi all
I have a problem with MVDR estimator in case of two identical target.
clear all ;close all ;clc;
ha = phased.ULA('NumElements',10,'ElementSpacing',0.5);
ang1 = [30; 0]; ang2 = [40; 0];
t = (0:0.001:1).';
s1 = cos(2*pi*t*300);
s2 = cos(2*pi*t*400);
fc = 300e6; % Operating frequency
angs = [ang1 ang2];
broadsideAngle = az2broadside(angs(1,:),angs(2,:))
hBeamscan = phased.BeamscanEstimator('SensorArray',ha,...
'OperatingFrequency',fc,'ScanAngles',-90:90);
hBeamscan.DOAOutputPort = true;
hBeamscan.NumSignals = 2;
x = collectPlaneWave(ha,[s1 s2],[ang1 ang2],fc);
rs = RandStream.create('mt19937ar','Seed',2007);
nPower = 0.01; % Noise power
noise = sqrt(nPower/2)*(randn(rs,size(x)) + 1i*randn(rs,size(x)));
x = x + noise; % Total received signal
[~,ang] = step(hBeamscan,x)
figure
plotSpectrum(hBeamscan);
hMVDR = phased.MVDREstimator('SensorArray',ha,...
'OperatingFrequency',fc,'ScanAngles',-90:90,...
'DOAOutputPort',true,'NumSignals',2);
[~,ang] = step(hMVDR,x)
figure
plotSpectrum(hMVDR);
Now I change the frequencies
s1 = cos(2*pi*t*300);
s2 = cos(2*pi*t*300);
What am I missing here ?
I also try TimeDelayLCMVBeamformer and I got the same results.
Is there a solution to this problem ?
Thx

답변 (1개)

Honglei Chen
Honglei Chen 2013년 2월 14일
Hi Zohar,
When you set the frequency of the second signal to 300 Hz, your two signals are identical. This represent the case where the two signals are correlated (fully correlated in your case). In that case, the performance of MVDR is degraded. One way to solve this issue is to use a technique called spatial smoothing. This option is not available MVDR beamformer. If your interest is to detect the direction of arrival, you can try to use phased.RootMUSICEstimator which can accommodate the spatial smoothing. For example, if I use the following code with your signal, I get the correct angles
>> estimator = phased.RootMUSICEstimator('SensorArray',ha,...
'OperatingFrequency',fc,'SpatialSmoothing',1);
>> step(estimator,x)
ans =
39.9476 30.0222
HTH
  댓글 수: 7
Honglei Chen
Honglei Chen 2013년 2월 15일
I don't have subscription for IEEE Xplore either. I just had a hard copy from old days. You can try the following book too. It's well written, but definitely take a while to navigate
zohar
zohar 2013년 2월 15일
Thx +1

댓글을 달려면 로그인하십시오.

카테고리

Help CenterFile Exchange에서 Direction of Arrival Estimation에 대해 자세히 알아보기

태그

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by