Update channels with Arduino MKR NB 1500 or Dfrobot SIM7600CE-T 4G(LTE) Shield
์กฐํ ์: 5 (์ต๊ทผ 30์ผ)
์ด์ ๋๊ธ ํ์
Hello community, for a few years i have build a monitoring system for ma bees based on the Sodaq Ndogo board with built in SIM800H module. The system works very very good with Thingspeak, but now the 2G network on my region will soon be switched off. I have already bought a Arduino MKR NB 1500 and a Dfrobot SIM7600CE-T 4G(LTE) Shield, but I'm not able to make the boards communicate with Thingspeak. Have anyone of you a Similar project with these boards to share with us? The data from my actual project cam be visualized at www.waabee.ch. Any help would be very appreciated.๐๐ป Greetings from Switzerland
๋๊ธ ์: 0
๋ต๋ณ (1๊ฐ)
Vinod
2020๋
7์ 22์ผ
I'm guessing you're using AT commands to send the data to ThingSpeak. It is likely you will need to modify the AT commands from the SIM800H module to the SIM7600CE-T module. Here's what I can find for the AT commands of the SIM7600 modules. Maybe you can start there and post back about what specific errors you get so we can try and point you in the right direction?
์ปค๋ฎค๋ํฐ
๋ ๋ง์ ๋ต๋ณ ๋ณด๊ธฐ: ThingSpeak ์ปค๋ฎค๋ํฐ
์ฐธ๊ณ ํญ๋ชฉ
์นดํ ๊ณ ๋ฆฌ
Help Center ๋ฐ File Exchange์์ ThingSpeak์ ๋ํด ์์ธํ ์์๋ณด๊ธฐ
์ ํ
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!