Plotting points from a 3D model onto a 2D graph

조회 수: 4 (최근 30일)
Alun Owen
Alun Owen 2020년 7월 21일
답변: Ravi Kumar 2020년 7월 21일
How would I plot a 2D graph with data from a 3D model using the PDE toolbox? I have searched everywehre and cannot find an answer. Ideally, I'd like to have about 6 points going through my thermal model, showing temperature decreasing with time, and clearly display this on a 2D plot, where X = time and Y = Temperature. Below is the code used. I'd really appreciate some help as I've been trying to do this for a while now - there should be a clear way to do this as it seems like a basic thing to do.
gm = multicuboid([2 2.1 2.7 2.95 3.2 3.45 4],[2.1 2.2 2.7 2.95 3.2 3.45 4],1.55);
thermalmodel = createpde('thermal','transient');
thermalmodel.Geometry = gm
pdegplot(thermalmodel,'CellLabels','on','FaceAlpha',0.5);
figure('Position',[10,10,800,400]);
subplot(1,2,1)
pdegplot(thermalmodel,'FaceAlpha',0.25,'CellLabel','on')
title('Geometry with Cell Labels')
subplot(1,2,2)
pdegplot(thermalmodel,'FaceAlpha',0.25,'FaceLabel','on')
title('Geometry with Face Labels')
generateMesh(thermalmodel,'Hmax',1);
Water at 30 degrees C
thermalProperties(thermalmodel,'ThermalConductivity',0.616,'SpecificHeat',4184,'MassDensity',997,'Cell',1);
304 stainless steel
thermalProperties(thermalmodel,'ThermalConductivity',16.2,'SpecificHeat',500,'MassDensity',8000,'Cell',2);
Crushed sandstone
thermalProperties(thermalmodel,'ThermalConductivity',12.5,'SpecificHeat',758,'MassDensity',2569,'Cell',3);
Concrete
thermalProperties(thermalmodel,'ThermalConductivity',0.6,'SpecificHeat',880,'MassDensity',2400,'Cell',4);
Insulation
thermalProperties(thermalmodel,'ThermalConductivity',0.13,'SpecificHeat',2890,'MassDensity',900,'Cell',5);
Concrete
thermalProperties(thermalmodel,'ThermalConductivity',0.6,'SpecificHeat',880,'MassDensity',2400,'Cell',6);
Soil
thermalProperties(thermalmodel,'ThermalConductivity',2,'SpecificHeat',830,'MassDensity',1230,"Cell",7);
thermalBC(thermalmodel,'Face',[1 2 3 4 5 6],'Temperature',80);
thermalIC(thermalmodel,12,'Cell',7);
thermalIC(thermalmodel,20,'Cell',1);
thermalIC(thermalmodel,20,'Cell',[2 3 4 5 6]);
Average 1m temp is 12 degrees
generateMesh(thermalmodel);
tlist = 10:100:10000;
thermalresults = solve(thermalmodel,tlist);
pdeplot3D(thermalmodel,'ColorMapData',thermalresults.Temperature(:,end));

채택된 답변

Ravi Kumar
Ravi Kumar 2020년 7월 21일
You can interpolate the temperatures at (x,y) coorinates over time and plot them. Refer to interpolateTemperatue function.
Regards,
Ravi

추가 답변 (0개)

태그

제품


릴리스

R2020a

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by