Why are the lines not showing up on my graphs?
조회 수: 4 (최근 30일)
이전 댓글 표시
g=9.81;
Ta=10;
mA=20;
for i=1:100
M=(i-1)*(30/99);
mB=4.05;
mC=M;
mD=M;
JC=0.005*M;
JD=JC;
JA=0.8055;
A=[mA 0 -1 1 0 0 0; (5*JA) 0 0.2 0 0 0 0; (10*JC) 0 0 -0.1 0 0.1 0; 0 mD 0 0 -1 -1 -1; 0 (10*JD) 0 0 0 -0.1 0.1; 0 mB 0 0 -1 0 0; -0.5 1 0 0 0 0 0];
B=[0; Ta; 0; (-mD*g); 0; (-mB*g); 0];
x=inv(A)*B;
aA(i)=x(1); aB(i)=x(2); FA(i)=x(3); TA(i)=x(4); TB(i)=x(5); TC(i)=x(6); TD(i)=x(7);
end
Mvector=linspace(0,30,100);
plot(Mvector, aA(i),'g',Mvector,aB(i),'b-.');
title('Acceleration');
legend('Disk A','Mass B');
xlabel('M (kg)');
ylabel('Acceleration (m/s^2)');
pause
plot(Mvector,aA(i),'g',Mvector,aB(i),'b-.');
title('Acceleration');
legend('Disk A','Mass M');
xlabel('M (kg)');
ylabel('acceleration (m/s^2)');
pause
plot(Mvector, FA(i),'k');
title('Plot 3');
xlabel('M (kg)');
ylabel('FA (N)');
pause
plot(Mvector,TA(i),'g',Mvector,TB(i),'b-.');
title('Plot 4');
legend('Cable A','Cable B');
xlabel('M (kg)');
ylabel('Tension (N))');
pause
plot(Mvector,TA(i),'g',Mvector,TC(i),'b:',Mvector,TD(i),'r-.');
title('Plot 5');
legend('Cable A','Cable C','Cable D');
xlabel('M (kg)');
ylabel('Tension (N)');
pause
plot(Mvector,FA(i)/(mA*g),'k');
title('Plot 6');
xlabel('M (kg)');
ylabel('mu');
댓글 수: 0
채택된 답변
Star Strider
2020년 5월 25일
You are only plotting one point (that being the last point) and it is not possible to plot lines with only one point.
Try this:
Mvector=linspace(0,30,100);
figure
plot(Mvector, aA,'g',Mvector,aB,'b-.');
title('Acceleration');
legend('Disk A','Mass B');
xlabel('M (kg)');
ylabel('Acceleration (m/s^2)');
% pause
figure
plot(Mvector,aA,'g',Mvector,aB,'b-.');
title('Acceleration');
legend('Disk A','Mass M');
xlabel('M (kg)');
ylabel('acceleration (m/s^2)');
% pause
figure
plot(Mvector, FA,'k');
title('Plot 3');
xlabel('M (kg)');
ylabel('FA (N)');
% pause
figure
plot(Mvector,TA,'g',Mvector,TB,'b-.');
title('Plot 4');
legend('Cable A','Cable B');
xlabel('M (kg)');
ylabel('Tension (N))');
% pause
figure
plot(Mvector,TA,'g',Mvector,TC,'b:',Mvector,TD(i),'r-.');
title('Plot 5');
legend('Cable A','Cable C','Cable D');
xlabel('M (kg)');
ylabel('Tension (N)');
% pause
figure
plot(Mvector,FA/(mA*g),'k');
title('Plot 6');
xlabel('M (kg)');
ylabel('mu');
Also, you were overplotting each new plot on the previous one, erasing the previous one. Since it appears you want them on separate figures, this slightly revised code does that. If you want to plot all of them on the sane axes, use the hold function.
댓글 수: 7
추가 답변 (0개)
참고 항목
카테고리
Help Center 및 File Exchange에서 National Instruments Frame Grabbers에 대해 자세히 알아보기
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!