Pulsewidth detection SIMULINK with a rounding issue

조회 수: 1 (최근 30일)
Robin Henne
Robin Henne 2019년 12월 19일
답변: Fangjun Jiang 2019년 12월 19일
Hi all, i want do detect the Pulsewidth of the Pulsegenerator. Therefore i check if the Signal i want to detect and my Clock is both on high.If they are then i increment the counter. The value of the counter is read every 100us. After that i substract the old counter value from the new one. I dont get, why the Scope shows 7 instead of 6.5 ( the Pulsegenerator is set to 65%).
Does anyone know why i get a 7 instead of a 6.5 although the counter is set to 2^16-1? I hope someone has an idea or an remark to fix my problem? As soon as i set the Generator to 1 Mhz i get the correct value.
Thank you a lot and merry christmas

채택된 답변

Fangjun Jiang
Fangjun Jiang 2019년 12월 19일
Your pulse cycle is 100us. Your clock cycle is 10us. So you can count 10 times during a pulse cycle. It is like counting by 10 so you got 70 or 60 when the pulse width is 65%.
When you increase your clock to 1Mhz which is 1us clock cycle, you are counting by 1 so you are able to get 65.

추가 답변 (0개)

카테고리

Help CenterFile Exchange에서 Sources에 대해 자세히 알아보기

제품


릴리스

R2018a

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by