Levelling of 3D built in stl file
조회 수: 1 (최근 30일)
이전 댓글 표시
Hello Community,
I have a stl file of 3D image. This image is titled 45 degree. I want to level (project) it on a plane so that I could get z values (height of the different parts of the cracks). For details please have a look at the attachment. This is sample which contains many cracks. Some of the cracked are elevated, i.e., curled ups. I want to know the height of these curlings. Thanks.
댓글 수: 2
답변 (1개)
KSSV
2019년 8월 7일
편집: KSSV
2019년 8월 7일
Download this file exchange function:
[t,p] = stlread('Tr_3.stl') ;
% Rotate along z axes by 45 degrees
th = 45 ;
R = [cosd(th) -sind(th) 0 ; sind(th) cosd(th) 0 ; 0 0 1] ; % Rotation matrix
pr = p*R ; % Rotate the points
pr(:,3) = pr(:,3)-mean(pr(:,3)) ;
% plot
trisurf(t,pr(:,1),pr(:,2),pr(:,3),'EdgeColor','none')
xlabel('x')
ylabel('y')
zlabel('z')
댓글 수: 5
KSSV
2019년 8월 7일
Okay.....the points have been shifted to (x,y) plane and mean is removed along z......wont this work out?
DGM
2025년 6월 27일
I'm going to assume that the datum is the lowest point, since the material can't intersect with the container.
% for the forum
unzip Tr_3.zip
% Inputs
T = stlread('Tr_3.stl'); % built-in since R2018b
th = -45; % parameter
% Since we're using the built-in reader
F = T.ConnectivityList;
V = T.Points;
R = [1 0 0; 0 cosd(th) -sind(th); 0 sind(th) cosd(th)]; % Rotation matrix
Vr = V*R; % Rotate the points around x
Vr(:,3) = Vr(:,3) - min(Vr(:,3)); % Remove z-offset
% Plot
trisurf(F,Vr(:,1),Vr(:,2),Vr(:,3),'EdgeColor','none')
xlabel('x')
ylabel('y')
zlabel('z')
axis equal
참고 항목
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!