필터 지우기
필터 지우기

how to replace the elements row by rows instead of column by column in matrix

조회 수: 10 (최근 30일)
A =[ 0 0 3 3 3 0 0 3 0 0; 0 0 0 3 3 3 0 3 3 0]
[rows,colms ] = size(A)
for i = 1:rows
for j = 1:colms
index-1 = find(A==3,1,'first')
index_2 = find(A==3,1,'last')
If A(i,j)=3 & A(i,j)==index_1
A(i,index_1:index_2) = A(i,index_1:index_2) +1
end
end
end
it gives me 5th and 18th indices while i want to get row wise like first should be 3rd and last should be 6th.
please help me in resolving this problem.
warm regards in advance.
  댓글 수: 2
madhan ravi
madhan ravi 2019년 7월 20일
Show how your expected result should look like.
M.S. Khan
M.S. Khan 2019년 7월 20일
Mr. Madhan Ravi, i want the first 3 in the rows as the lowest element and the last one as the heighest element in each row. and want to add 1 .e.g.
0 0 3 3 3 0 0 3 0 0 => 0 0 4 4 1 1 4 0 0 (i want to add 1 from lowest 3 to highest 3)
0 0 0 3 3 3 0 3 3 0 => 0 0 0 4 4 4 1 4 4 0

댓글을 달려면 로그인하십시오.

채택된 답변

TADA
TADA 2019년 7월 20일
find(A==3,1,'first')
find(A==3,1,'last')
These lines find linear indices not [row, col] subsets. Linear indices go along all the rows of the first column, then on to the second column and so on.
These two lines also disregard i and j completely, so they always give the absolute first and last linear indices in the entire matrix each iteration (5 and 18).
I dont know what exactly you're trying to achieve, but maybe you need to compare only current row:
index_1 = find(A(i,:)==3,1,'first');
index_2 = find(A(i,:)==3,1,'last');
Look here for explanation on array indexing in Matlab
if A(i,j)=3 & A(i,j)==index_1
This condition compares the value of A(i,j) to 3 and to the first index which equals 3, that makes little sence to me, but i may be missing your intent
If you explain with more detail what you are trying to do, we may be able to help you get to the right solution
  댓글 수: 5

댓글을 달려면 로그인하십시오.

추가 답변 (2개)

Bruno Luong
Bruno Luong 2019년 7월 20일
f = @(A)cumsum(A==3,2)>0;
A = A + f(A).*fliplr(f(fliplr(A)))
  댓글 수: 4
Bruno Luong
Bruno Luong 2019년 7월 21일
편집: Bruno Luong 2019년 7월 21일
"could you plz explain to me."
Sure here is step by step for single row input:
> A = [0 0 3 3 3 0 0 3 0 0].
This will put 1 at the place where there is element with value == 3, so 0 before the first 3 on the left
>> A==3
ans =
1×10 logical array
0 0 1 1 1 0 0 1 0 0
When I apply cumsum to this, after the first 3 element values of the ouput are >= 1. (it actually increase by 1 when it meets a 3)
>> cumsum(A==3)
ans =
0 0 1 2 3 3 3 4 4 4
I need array of 0s, but then 1s starting from the most left 3, so I do logical commparison
>> cumsum(A==3)>0
ans =
1×10 logical array
0 0 1 1 1 1 1 1 1 1
The three steps are combined, I put in a anonymous function
f = @(A)cumsum(A==3,2)>0;
mask1 = f(A)
Now I want to do the exact same trick but runiing from right-to-left. I simply flip the input array, apply f(), then flip the output back
> mask2 = flip(f(flip(A)))
mask2 =
1×10 logical array
1 1 1 1 1 1 1 1 0 0
Meaning I have array with 0s on the right of the last 3 and 1s on the left.
The product of mask1 and mask2 gives
>> mask1.*mask2
ans =
0 0 1 1 1 1 1 1 0 0
provides array with 0s on the right of the last 3, 0 on the left of the first 3, and 1s in between them.
I then simply add them to the original array A to get the desired result.
M.S. Khan
M.S. Khan 2019년 7월 23일
Dear Bruno, its so complicated. its blowing above my head.
Thanks for your time.
Regards

댓글을 달려면 로그인하십시오.


KALYAN ACHARJYA
KALYAN ACHARJYA 2019년 7월 20일
편집: KALYAN ACHARJYA 2019년 7월 20일
A=[0 0 3 3 3 0 0 3 0 0; 0 0 0 3 3 3 0 3 3 0]
[rows colm]=size(A);
B=zeros(rows,colm);
for i=1:rows
B(i,i+2:end-3+i)=1;
end
result=A+B
Command Window:
A =
0 0 3 3 3 0 0 3 0 0
0 0 0 3 3 3 0 3 3 0
result =
0 0 4 4 4 1 1 4 0 0
0 0 0 4 4 4 1 4 4 0
>>

카테고리

Help CenterFile Exchange에서 Matrix Indexing에 대해 자세히 알아보기

제품

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by