How to connect the result of simulink system with a block of simscape

How i can connect the result of simulink system with a block of simscape. For example i need to change the initial temperature of the pipe TL with a constant that i get out form a simulink system. How i cand do that?

[Prasanth Sunkara]

The "Initial Temperature" parameter must be defined before the begining of Simulation. I am not sure how you have modelled this data transfer between Simulink block and Pipe (TL) block. Can you please eloborate on this?

Answer 1

[Mohammad Hukan]

If you are asking how to connect the simulink signal to a simscape system then the answer is the Simulink-PS Converter located under Simscape/Foundation Libraray/Utilities.

If this is not your question then please elaburate or provide a screenshoot if possible

BR, MH

[amira syafiqa]

hi, sorry for interrupt. i want to ask you a question. i have voltage and current data and i model it by using data from workspace. my problem is, the simulink model cannot connect with simscape. how can i solve it? thank you.

[Mohammad Hukan]

hi. same answer! use the Simulink-PS Converter. Any connection between simscape and simulink needs a Simulink-PS or PS-Simulink converter inbetween

[amira syafiqa]

okay thank you so much. but i still cant manage to solve it by using PS-Simulink or vice versa

[Mohammad Hukan]

I don't understand your problem. Can you post a screenshot and explain more what the problem is?

[amira syafiqa]

i have this model in simulink, but is it possible to connect this model with simscape components? or is there any way to solve it?

[Mohammad Hukan]

solve what? you are just plotting your data!

Anyway, yes you can. as I said use the Simulink to PS converter block

https://de.mathworks.com/help/physmod/simscape/ref/simulinkpsconverter.html

then you can connect it to simscape componenets

[amira syafiqa]

thank you. okay let say, i used ieee 14 bus system. then, how do i connect the model above with the 14 bus sytem?

[amira syafiqa]

Hi, its me again. I just want to clarify few things regarding my problems here. Firstly, i develop my current model of LED in MATLAB simulink. Second of that, i develop a simple distribution network by doing simscape components. Below, i attached the figures for you to refer. I really hope that you can guide and teach me refarding my problems. Thank you so much.