phase and/or amplitude vs frequency

Hi everybody I have around 4000 IR images for a concrete specimen for one month. The time between each image is 10 minutes. The specimen has several defect areas. My supervisor asked to pick up two pixels one at the defect area and the other at sound area for all these images. So if we draw these pixel versus time we have like two signals. Anyhow, he wants to take FFT for these two selected pixels versus time and draw the phase and the amplitude versus frequency. I have problem how to select the frequency. I wrote a code how select these pixels, anyhow I attached the pixel for one defect area before I make the FFT also the code. Please help me with and I appreciate your help. Thanks.

%%%% the code close all clear all clc

a6 = zeros(240,320); a7 = zeros(240,320); srcFiles = dir('location of images\*.mim'); % the folder in which ur images exists for i = 1 : length(srcFiles) filename = strcat('location of images\',srcFiles(i).name); a1 = imread(filename); a2=fft2(a1); a3=abs(a2);% the amplitude a4=log(a3); a5=angle(a2);% the phase a6=plus(a6,a5); a7=a7+a4;

% amplitude contrast for defect areas D1(i,1)=(a4(87,123)+a4(78,114)+a4(78,132)+a4(98,114)+a4(98,132))/5-(a4(87,70)+a4(87,160)+a4(87,270)+a4(179,70)+a4(179,160)+a4(179,270))/6; D1(i,2)=a4(87,217)-(a4(87,70)+a4(87,160)+a4(87,270)+a4(179,70)+a4(179,160)+a4(179,270))/6; D1(i,3)=a4(179,123)-(a4(87,70)+a4(87,160)+a4(87,270)+a4(179,70)+a4(179,160)+a4(179,270))/6; D1(i,4)=a4(179,217)-(a4(87,70)+a4(87,160)+a4(87,270)+a4(179,70)+a4(179,160)+a4(179,270))/6;

% phase contrast for defect areas D2(i,1)=(a5(87,123)+a5(78,114)+a5(78,132)+a5(98,114)+a5(98,132))/5-(a5(87,70)+a5(87,160)+a5(87,270)+a5(179,70)+a5(179,160)+a5(179,270))/6; D2(i,2)=a5(87,217)-(a5(87,70)+a5(87,160)+a5(87,270)+a5(179,70)+a5(179,160)+a5(179,270))/6; D2(i,3)=a5(179,123)-(a5(87,70)+a5(87,160)+a5(87,270)+a5(179,70)+a5(179,160)+a5(179,270))/6; D2(i,4)=a5(179,217)-(a5(87,70)+a5(87,160)+a5(87,270)+a5(179,70)+a5(179,160)+a5(179,270))/6;

% raw data for defect areas D3(i,1)=a1(87,123); D3(i,2)=a1(87,217); D3(i,3)=a1(179,123); D3(i,4)=a1(179,217);

end

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% for j=1:length(srcFiles) value(j,1)=D3(j,1); % for defect area with depth 1 inch end time = 0:j-1; figure plot(time,value) title('Time Data'); xlabel('Time'); ylabel('Raw Data');

dftvalue = fft(value); freq = -pi:(2*pi)/length(value):pi-(2*pi)/length(value);

figure; plot(freq,abs(fftshift(dftvalue))) title('Amplitude'); xlabel('Frequency'); ylabel('Amplitude');

figure; plot(freq,angle(fftshift(dftvalue))) title('Phase'); xlabel('Frequency'); ylabel('Phase');

X=abs(fftshift(dftvalue)); Y=angle(fftshift(dftvalue));