이 질문을 팔로우합니다.
- 팔로우하는 게시물 피드에서 업데이트를 확인할 수 있습니다.
- 정보 수신 기본 설정에 따라 이메일을 받을 수 있습니다.
How can I solve this problem?
조회 수: 2 (최근 30일)
이전 댓글 표시
I am applying three different motion input to three different joints. and simulink is giving this error.
채택된 답변
Birdman
2017년 11월 28일
I am not sure, but please make sure that number of AUTOMATICALLY COMPUTED and PROVIDED BY INPUT motions are equal provided by all joints in your model.
댓글 수: 29
Birdman
2017년 11월 29일
No, you said that you apply motion and torque to some joints. But also, torques have to be automatically computed for the ones you apply motion and vice versa.
bayram özmen
2017년 11월 29일
Yes I can. But I want to ask one more question. I am applying a motion to one joint. but the other ones behave like this joint. why happened like this? I want to apply different motion for each joint. how can ı do this?
Birdman
2017년 11월 29일
Then, you need to set actuation as Motion and you need to automatically compute torques.
bayram özmen
2017년 11월 29일
yes I did like that. please can you investigate my simulink model? ı will achieve a constant angle but ı need a motion that have angular displacement angular velocity and angular acceleration. then they will be entered to one simulink to converter. Which units I should choose? Do you think my algoritma is correct?
Birdman
2017년 11월 29일
As units, I think rad,rad/s,rad/s^2 are allowed. Your algorithm looks okay but maybe the differential equations can not be solved for the inputs you provide. Therefore make sure to give reasonable inputs to your model. That's all I can say without looking at your model on Simulink.
bayram özmen
2017년 11월 29일
You are so helpful. thank you so so much for your interest. I adjusted the unit as rad. But the results of my kinematic equations are constand value as rad. I applied this to achieve a motion in figure below. But ı applied to joint this. joint did not motion. just stay that position angle. ı want to stay that position by acting. Thats why what should I apply as input?
Birdman
2017년 11월 29일
But if you apply position command, then it will automatically go to that position and stay.
bayram özmen
2017년 11월 29일
right I want to stay in that position. But I want to rotate that piece that connect to motor.(circle in figure)
Birdman
2017년 11월 29일
Oh, you are trying to implement a ball-plate system. That's nice :)
Well, I suggest you to use spherical joint for that connection point to the motor. Spherical joints can rotate in three axis but do not change their positions.
bayram özmen
2017년 11월 29일
But spherical joint only one torque input. How can I set angle that I want? Also you mean these spherical joints that connect to motorkol in figure.
Birdman
2017년 11월 29일
The motions will be automatically computed once you apply the reasonable torque values.
bayram özmen
2017년 11월 29일
you try to tell me, you apply to torque for desired angle. Final position will be desired angle. ı understand true? But ı should apply torque input to revolute joint or spherical joint?
Birdman
2017년 11월 29일
Apply torque input to spherical joint. If you constructed the model reasonable, then correct values for motions will be automatically computed.
bayram özmen
2017년 11월 29일
ıt ıs perfect. But ı dont know the necessary torque value for desired position. What should I do?
bayram özmen
2017년 11월 29일
well, ı will do like that. but ı do not want to one motor. and ı am applying torque to one motor's spherical joint. But other pieces motion. How can I fix one motor when the others are acting?
bayram özmen
2017년 11월 29일
I mean ı have three motor but ı do not want to move of one motor but ı want to move the other two motor. However ı am appling input one motor and all motors are moving?
Birdman
2017년 11월 29일
If their constraint is satisfied, they may move according to kinematic calculations.
bayram özmen
2017년 11월 29일
Absolutely you are right. Well Can I apply this method that into figure? Firstly ı find the actuation torque for desired angle and the ı can apply may be. I am not sure?
bayram özmen
2017년 11월 29일
I think ıt will work. Also I have a last question. If actuation torque is not a constant, for example ıf ıt is like sinus. How can I apply that torque? I am really very grateful. :)
추가 답변 (1개)
bayram özmen
2017년 12월 3일
Hi. I am just dealing with this platform. I know how many angle ıt will move so ı solved the necessity angle for that motion in desired angle by inverse kinematic equation. How can I do this? Which block I apply for desired angle? revolute joint block are there between motor and piece that need to move.
참고 항목
카테고리
Help Center 및 File Exchange에서 Assembly에 대해 자세히 알아보기
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!오류 발생
페이지가 변경되었기 때문에 동작을 완료할 수 없습니다. 업데이트된 상태를 보려면 페이지를 다시 불러오십시오.
웹사이트 선택
번역된 콘텐츠를 보고 지역별 이벤트와 혜택을 살펴보려면 웹사이트를 선택하십시오. 현재 계신 지역에 따라 다음 웹사이트를 권장합니다:
또한 다음 목록에서 웹사이트를 선택하실 수도 있습니다.
사이트 성능 최적화 방법
최고의 사이트 성능을 위해 중국 사이트(중국어 또는 영어)를 선택하십시오. 현재 계신 지역에서는 다른 국가의 MathWorks 사이트 방문이 최적화되지 않았습니다.
미주
- América Latina (Español)
- Canada (English)
- United States (English)
유럽
- Belgium (English)
- Denmark (English)
- Deutschland (Deutsch)
- España (Español)
- Finland (English)
- France (Français)
- Ireland (English)
- Italia (Italiano)
- Luxembourg (English)
- Netherlands (English)
- Norway (English)
- Österreich (Deutsch)
- Portugal (English)
- Sweden (English)
- Switzerland
- United Kingdom (English)
아시아 태평양
- Australia (English)
- India (English)
- New Zealand (English)
- 中国
- 日本Japanese (日本語)
- 한국Korean (한국어)