Multiple plots in uitab/uitabgroup

조회 수: 29 (최근 30일)
Seth Schoenhardt
Seth Schoenhardt 2017년 10월 19일
편집: Mehmed Saad 2020년 6월 24일
Suppose I have a uitabgroup with multiple uitabs. In each tab, a plot of some analyzed data is shown. How do I code the uitabgroup or each uitab so that, when the analyzed data is changed, the old graph REMAINS in the uitab to be plotted against. I am operating inside of a while loop. I've tried the 'hold on' function many different ways but to no avail
My code looks something like shown below. I'd paste the code directly but it is far too long. No other functionality than what is shown has been applied. Thanks in advance
h_figure_1 = figure(1);
h_tabgroup = uitabgroup(h_figure_1);
tab1 = uitab(h_tabgroup,'Title','y relative to z');
tab2 = uitab(h_tabgroup,'Title','y relative to z and n');
start =1;
while start == 1
% Ask user to upload data for z and n, given x and y
axes('parent',tab1)
plot(x,y/z)
axes('parent',tab2)
subplot(2,1,1)
plot(x,y/(z+n))
subplot(2,1,2)
plot(x,y/n)
start = input('Run again? 1 - yes, 0 - no');
end

채택된 답변

Walter Roberson
Walter Roberson 2017년 10월 19일
Each of your
axes('parent',tab1)
and similar is creating a new axes and making it the default axes. The default position is used for the axes. You are not setting the axes color to 'none' so the new axes is "on top of" the old and hiding it.
A better structure:
h_figure_1 = figure(1);
h_tabgroup = uitabgroup(h_figure_1);
tab1 = uitab(h_tabgroup,'Title','y relative to z');
tab2 = uitab(h_tabgroup,'Title','y relative to z and n');
tab1_axes = axes('parent', tab1);
hold(tab1_axes, 'on');
tab2_axes1 = subplot(tab2, 2, 1, 1);
hold(tab2_axes1, 'on');
tab2_axes2 = sbplot(tab2, 2, 1, 2);
hold(tab2_axes2, 'on');
while true
% Ask user to upload data for z and n, given x and y
plot(tab1_axes, x, y/z);
plot(tab2_axes1, x, y/(z+n));
plot(tab2_axes2, x, y/n);
if input('Run again? 1 - yes, 0 - no') ~= 1; break; end
end
  댓글 수: 5
Walter Roberson
Walter Roberson 2017년 10월 21일
Do you want a legend for each plot() call, or for each line that gets drawn? You do not appear to be making sure that you get a consistent color for each line if multiple plots are being drawn.
Seth Schoenhardt
Seth Schoenhardt 2017년 10월 21일
I would like one for each line drawn, denoting which data set is represented

댓글을 달려면 로그인하십시오.

추가 답변 (1개)

Mehmed Saad
Mehmed Saad 2020년 6월 24일
편집: Mehmed Saad 2020년 6월 24일

The Dumb Way

I found another way to do that (maybe it's not that efficient)
Basically subplot will plot all data on figure which is behind the tab. once it completed plotting just copy objects from figure
(once you are finished with a subplot, the property NextPlot must be set to replace and not add that is why hold off is necessary)
fh= figure;
utb = uitabgroup(fh);
for ii = 1:2
f = uitab(utb,'Title',sprintf('Tab %d',ii));
subplot(221)
plot(rand(1,10))
hold on;
plot(rand(1,10))
hold off; % necessary
subplot(222)
plot(rand(1,10))
hold on;
plot(rand(1,10))
hold off;% necessary
subplot(223)
plot(rand(1,10))
subplot(224)
plot(rand(1,10))
copyobj(fh.Children(2:end),f) %Copy subplots from figure to tab
end
delete(fh.Children(2:end)) % delete subplots from figure

카테고리

Help CenterFile Exchange에서 Annotations에 대해 자세히 알아보기

태그

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by