Is there any way I can make the attached contour plots more smooth ?

조회 수: 43 (최근 30일)
Ankit Bhandari 2017년 8월 6일
답변: jacob faerman 2018년 1월 15일
I have attached two contour plots for pressure field outside an ellipse. The contour plots I got are jagged, may be due to the numerical integration I am using to calculate the pressure fields.The two plots are with Gaussian points 15000 and 5000 respectively. It is observable that with more Gaussian points, the contour plots are becoming smooth, but it is also taking time. Is there any other way to get smooth contour lines.

댓글을 달려면 로그인하십시오.

채택된 답변

John D'Errico 2017년 8월 6일
Sorry. If you try to resize a matrix (using interpolation) that is not itself sufficiently smooth that the original matrix yields non-smooth contours, you will get more finely interpolated noise! Interp2 is a waste of time here.
If you have a noisy matrix, then BEFORE you compute contours, you MUST smooth it FIRST if you want smooth contours. That smoothing may be done by removing the noise before you create the matrix, thus noise reduction prior to creating the matrix of data. Or you can do smoothing by applying a smoothing tool to your matrix, after creation.
You are doing some form of numerical integration that creates a noisy result. So a higher precision numerical integration is an option. Noise in the integration, as well as your comments, suggests you might be doing a Monte Carlo integration. I can't help if you don't say.
If you must do post smoothing on the matrix, then the classic solution is simply to apply a Gaussian blur to the matrix. You can do that using conv2. Or it should be possible to use methods like Savitsky-Golay, in two dimensions.
댓글 수: 4이전 댓글 2개 표시이전 댓글 2개 숨기기
Ankit Bhandari 2017년 8월 6일
Hi John ! Thanks for an amazing answer.
Below are the two plots I have got. The first one is the contour plot with 10000 gaussian points calculation. This is a pressure field around an ellipse. The second plot is the smoothened curve I got using the conv2 function with kernel as you mentioned. I have a question regarding the choice of kernel? How do we decide what kernel to use?
Also, as it is observable, the values in colourbar are changed, for example, the maximum pressure in original plot was .6, but in the smoothened plot is .15. Could you please provide some suggestions how can I work this out. Thanks !
Image Analyst 2017년 8월 7일
I agree with John. Smoothing array before finding contours is a good solution, otherwise Savitzky-Golay filter to smooth a jaggedy outline on a non-smoothed array. It's easy enough to try them both and see which you like better. For what it's worth, see my attached Savitzky-Golay outline smoothing demo.

댓글을 달려면 로그인하십시오.

추가 답변 (4개)

KSSV 2017년 8월 6일
You should be plotting the contours from a matrix say Z..you can increase the dimensions of this matrix using imresize. If you have spatial data matrices X and Y also, you may go for interpolation using interp2.
댓글 수: 0이전 댓글 -2개 표시이전 댓글 -2개 숨기기

댓글을 달려면 로그인하십시오.

I like KSSV's option of using imresize, because it performs antialiasing before interpolation. To scale by 1/5,
sc = 1/5; % scaling factor
contour(imresize(X,sc),imresize(Y,sc),imresize(Z,sc))
Alternatively, you can do a 2D gaussian lowpass filter pretty easily with filt2. Syntax would be
res = ?;
lambda = ?;
Zf = filt2(Z,res,lambda,'lp');
contour(X,Y,Zf)
where you'll have to enter res, which is the pixel size in x,y; and you'll have to enter lambda, the approximate lowpass wavelength.
댓글 수: 0이전 댓글 -2개 표시이전 댓글 -2개 숨기기

댓글을 달려면 로그인하십시오.

Teja Muppirala 2017년 8월 7일
편집: Teja Muppirala 2017년 8월 7일
Maybe a median filter? However ORDFILT2 needs the Image Processing Toolbox.
Z = peaks(501); % Sample data
Z = Z +0.1*randn(size(Z));
Z(abs(Z)<0.5) = 0;
subplot(211);
contourf(Z);
title('original')
subplot(212);
filtArea = x.^2+y.^2 <= rad.^2; % Use a round filter
Zfilt = ordfilt2(Z,ceil(nnz(filtArea)/2),filtArea);
contourf(Zfilt);
title('filtered')
댓글 수: 0이전 댓글 -2개 표시이전 댓글 -2개 숨기기

댓글을 달려면 로그인하십시오.

jacob faerman 2018년 1월 15일
The median filter worked nicely for me, and filter2 does not need the image processing toolbox.

댓글을 달려면 로그인하십시오.

카테고리

Help CenterFile Exchange에서 Smoothing and Denoising에 대해 자세히 알아보기

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by