Simulink Real-Time missing signals
조회 수: 4 (최근 30일)
이전 댓글 표시
Hi everyone, I recently came across the folowing Problem using Simulink Realtime: When I compile and run a model, usualy all the signals (outputs of Simulink-Blocks) are listed in the Real-Time Explorer and can be monitored on the host-PC. In my demo model (screenshot appended) the outputs of the "Bandpass Filter 1", "Notch-Peak Filter 1", "Lowpass Filter" and "VibroOutMonitor" are not listed in the Real-Time Explorer and cannot be monitored (MATLAB-command getsignalid returns an empty value). Is there a way to enshure that all signals occuring in a model can be monitored using the Real-Time Explorer or the getsignalid/getsignal command? Adding a dedicated Host-Scope to the model monitoring the affected signals resolves the problem in principle, but monitoring signals without the need to recompile is a handy debug-feature.
댓글 수: 0
답변 (2개)
Jon Lobo
2017년 7월 24일
Put a unity gain (gain block with value of 1) in between those blocks and name that block as it makes sense to you (BP Filter, LP Filter etc). This has to do with how the filter blocks exist (network of other blocks) and how the code is generated. You should be able to see the signal that comes out of the gain block.
댓글 수: 0
참고 항목
카테고리
Help Center 및 File Exchange에서 Target Computer Setup에 대해 자세히 알아보기
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!