How to model 3 phase equivalent source

조회 수: 2 (최근 30일)
Ayush Chandel
Ayush Chandel 2017년 5월 10일
답변: Gautham Sholingar 2017년 5월 15일
I have Positive sequence impedance and zero sequence impedance as well as 3 phase fault data os a substation source.
Z1 = 0.5 + j3.5 ohms Z0 = 0.4 + j3 ohms
I short circuit = 3961 Amps Voltage is 25 kV.
How can I model this in matlab simulink? Thank You.
Regards AC

답변 (1개)

Gautham Sholingar
Gautham Sholingar 2017년 5월 15일
A good starting point to model this scenario is to look at the 'Three-Phase Mutual Inductance Z1-Z0' block which shows how to model 3-phase mutual inductance. The following documentation link explains this in detail:
The example link on this page: "power_3phmutseq10" illustrates the use of this block to build a three-phase inductive source with different values for the positive-sequence and zero sequence impedance.


Help CenterFile Exchange에서 Switches and Breakers에 대해 자세히 알아보기

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by