How to connect Intel Real Sense with Matlab??
조회 수: 38 (최근 30일)
이전 댓글 표시
I am using Intel Real Sense F200 camera. I have a hard time connecting it with my Matlab 2015a. Is there any adaptor that supports Intel Real sense?. Any solution might help. Thanks in advance.
댓글 수: 0
채택된 답변
Alexandre Soares da Silva
2018년 11월 16일
Hi. I developed with a group a small sr300 app for Matlab. It uses the previous SDK (1.0) and I heard back from an user that the depth projectio is misplaced. Since the streams (RGB, infrared, depth) code works, it might be a good start for you (I didn't develop the RGB stream code, but I know it requires a bit of manipulation to be unwrapped on the screen). Here it is: https://github.com/alexandresoaresilva/MATLABrealsense
댓글 수: 0
추가 답변 (3개)
Madhura Suresh
2016년 9월 16일
Support for Intel RealSense is being considered for a future release of MATLAB.
댓글 수: 0
Maarten Jansen
2017년 3월 14일
I am using Intel Real Sense sr300 camera. I can read out the depth camera, but it is not clear what the images represent exactly. For a 640x480 depth image the raw data contains a 1280x960x3 data matrix: In a single snapshot 4 camera datasets are captured in a single matrix (2x2 views), 2 images represent depth information and 2 images seem to representing what looks like a grayscale image.
However there seem to be some bitshifts. The depth images seem to be wrapped, indicating that some bitplanes are misplaced. High intensity grayscale values are also wrapped.
Only looking at the wrapped depth images the depth noise seems to be very promising. So I hope to do some fun stuff with this camera, but I first have to solve the decoding problem of the raw images.
Any help is welcome...
댓글 수: 1
Salvador Blanco Negrete
2018년 1월 12일
Do you have the sample code? I am using the webcam library, but I get a 2d green image:
webcam with properties:
Name: 'Intel(R) RealSense(TM) Camera SR300 Depth'
Resolution: '640x480'
AvailableResolutions: {'640x480'}
cr
2019년 6월 17일
Realsense cameras (atleast the one I got -SR300) have various channels. E.g. vir = videoinput('winvideo', 3, 'INVZ16_640x480') gives me access to IR channel. IMAQ toolbox with generic OS webcam hardware addon.
댓글 수: 0
참고 항목
카테고리
Help Center 및 File Exchange에서 MATLAB Support Package for IP Cameras에 대해 자세히 알아보기
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!