Viewing liquid temperatures in SimScape
조회 수: 1 (최근 30일)
이전 댓글 표시
Hello,
I am resurrecting this thread as I am back trying to do something similar but never found a solution. I have attached an attempted model of what I have drawn figuratively in the thread linked above.
I am interested in seeing the water temperature before and after each of the pipes. I presume the temperature probes that I have shown are showing the temperature of the pipe itself.
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/153245/image.png)
Thanks,
Barry
댓글 수: 0
채택된 답변
Sebastian Castro
2016년 1월 13일
편집: Sebastian Castro
2016년 1월 13일
The Simscape > Foundation Library > Thermal Liquid > Sensors library should have a "Pressure & Temperature Sensor (TL)" block.
(whew, that's a lot of words)
Anyway, you should be able to connect these sensor blocks to the A and B ports of the pipes to get the temperatures you need. If you want the absolute temperatures, you want to put the "A" port of the sensor to the pipe location and the "B" port to an "Absolute Reference (TL)" block.
- Sebastian
추가 답변 (0개)
참고 항목
카테고리
Help Center 및 File Exchange에서 Elements에 대해 자세히 알아보기
제품
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!