Cannot find USRP in matlab 2011b in windows with the command "findsdru"
조회 수: 3 (최근 30일)
이전 댓글 표시
I have done with the following steps: 1 downloaded version 003.002.003 of the firmware and FPGA images 2 configured host computer IP address to be 192.168.10.1 3 when I ping 192.168.10.2, 0% loss which mean the network connected. 4 But when I input "findsdru" the first time,"ans =No devices found". At the second time,"ans =Empty string: 1-by-0".At the 3rd time,"The conversion from a local code page string to unicode changes the number of characters. This is not supported. Error in usrp_uhd_mapi"
Can someone help me?
댓글 수: 2
Walter Roberson
2011년 12월 29일
http://www.mathworks.com/matlabcentral/answers/15989-findsdru-error-using-ubuntu-linux-and-matlab-r2011a
답변 (2개)
Ethem
2012년 7월 17일
findsdru uses broadcast packets to discover USRP radios connected to the host computer. If you have a firewall that blocks broadcast packets, findsdru returns "No devices found".
Most firewalls block broadcast packets. You can either configure your firewall to allow these packets, or turn off the firewall completely.
Regards, Ethem
댓글 수: 1
Sanat Varasada
2016년 2월 15일
Thank you. But how to configure the firewall settings to allow the broadcast packets. Help me out with this, i will appreciate greatly.
aa
2013년 1월 10일
I meet the same problem. It is difficult to find out any useful suggestions in google. It cost my 2 hours. My solution is changing to the vision of matlab from r2011a to r2011b. Everyting is fine. My email is lunarlight@126.com. Welcome to commuicate me.
댓글 수: 0
참고 항목
카테고리
Help Center 및 File Exchange에서 Communications Toolbox에 대해 자세히 알아보기
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!