How should i solve the STM32CubeMX tool Firmware installation issue?
조회 수: 59 (최근 30일)
이전 댓글 표시
Embedded Coder Support Package for STMicroelectronics STM32 Processors : Installation Errors
[ERROR] AnalyticsContext:980 - The ST intranet updater server is unknown: mcucrossselector.codex.cro.st.com
[ERROR] ServerAccessManage:1058 - Problem during Server Connexion : IO error PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
[ERROR] ServerAccessManage:1032 - Warning during Server Connexion : Unknown host www.ebuc23.com
[ERROR] ConfigurationRetriever:139 - IOException on connection: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
[ERROR] ConfigurationRetriever:139 - IOException on connection: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
[ERROR] ConfigurationRetriever:139 - IOException on connection: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
[ERROR] ServerAccessManage:1058 - Problem during Server Connexion : IO error PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
[ERROR] ServerAccessManage:537 - Problem during Server Connexion : : updaters.zip.
[ERROR] ServerAccessManage:1032 - Warning during Server Connexion : Unknown host www.ebuc23.com
[ERROR] ServerAccessManage:537 - Unknown host server name. : updaters.zip.
[ERROR] Engine:463 - C:\Users\karthikeyan j\.stm32cubemx\thirdparties\pdsc\EmbeddedOffice.I-CUBE-FS-RTOS.1.0.1.pdsc: PDSC version is not supported
[ERROR] Engine:463 - C:\Users\karthikeyan j\.stm32cubemx\thirdparties\pdsc\RealThread.X-CUBE-RT-Thread_Nano.4.1.1.pdsc: PDSC version is not supported
[ERROR] Engine:463 - C:\Users\karthikeyan j\.stm32cubemx\thirdparties\pdsc\STMicroelectronics.X-CUBE-DPower.1.2.0.pdsc: PDSC version is not supported
[ERROR] Engine:463 - C:\Users\karthikeyan j\.stm32cubemx\thirdparties\pdsc\STMicroelectronics.FP-SNS-STBOX1.2.0.0.pdsc: PDSC version is not supported
swmgr refresh
2024-07-22 11:50:58,605 [ERROR] ConfigurationRetriever:139 - IOException on connection: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
2024-07-22 11:50:58,678 [ERROR] ConfigurationRetriever:139 - IOException on connection: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
2024-07-22 11:50:58,797 [ERROR] ServerAccessManage:1058 - Problem during Server Connexion : IO error PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
2024-07-22 11:50:58,798 [ERROR] ServerAccessManage:537 - Problem during Server Connexion : : updaters.zip.
2024-07-22 11:50:58,802 [ERROR] ServerAccessManage:1032 - Warning during Server Connexion : Unknown host www.ebuc23.com
2024-07-22 11:50:58,802 [ERROR] ServerAccessManage:537 - Unknown host server name. : updaters.zip.
2024-07-22 11:50:59,031 [INFO] CheckServerUpdateThread:115 - End of CheckServer Thread
2024-07-22 11:50:59,045 [INFO] LoadServerUpdatesThread:339 - End of LoadServerUpdate Thread
KO
The Previous Step installation screenshot are attached for reference.
댓글 수: 0
답변 (2개)
Vandit
2024년 7월 22일
Hello Karthikeyan,
To resolve the STM32CubeMX tool firmware installation issue, you can try a clean reinstallation of the support package. For instructions on how to perform a clean reinstallation of a support package, please refer to the following link:
Hope this helps.
댓글 수: 2
Vandit
2024년 7월 23일
편집: Vandit
2024년 7월 23일
Hello Karthikeyan,
You can try out the below mentioned workarounds to resolve your query:
- Change the path of firmware to a different folder.
- Open STM32CubeMX once and then proceed with the hardware setup screen.
- Ensure that the folder where installation is happening has Write permissions.
- Confirm the path in the file "C:\Users\'username'\.stm32cubemx\plugins\updater\updater.ini" is the same as the new folder path.
If the issue persists, you may install the firmware directly from CubeMX into the required folder and run the hardware setup to register with Simulink. For this, open STM32CubeMX, press Alt+S (help: Updater settings), set the path to the new folder, click OK, then press Alt+U (help: Manage Embedded software package), and download and install the following firmware versions: G4 Firmware version 1.5.0, F4 Firmware version 1.26.2, F7 Firmware version 1.16.2, and H7 Firmware version 1.9.1.
Also, please let me know the MATLAB version you are currently using.
Hope this helps.
Karthikeyan J
2024년 7월 23일
댓글 수: 2
Goutham Varanasi
2024년 8월 1일 8:14
Hi karthikeyan,
- After installing the firmware manually to a folder, try running the hardware set screen and point to the same folder where the firmware is downloaded. After this if you run the command getpref(MW_STM32)', you should be seeing the firmware path pointing to the folder specified.
- Ensure the path doesnt have any spaces. Path can contain letters,digits or underscores. I assume there is a space in the folderpath specified in the attachment. Specify File Names - MATLAB & Simulink
- If the above issues persists, please contact Technical Support with output of the command 'getpref(MW_STM32)' , expected paths and description of steps that were taken in the process.
Regards
Goutham Varanasi.
참고 항목
카테고리
Help Center 및 File Exchange에서 Introduction to Installation and Licensing에 대해 자세히 알아보기
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!