- Concatenation - https://www.mathworks.com/help/matlab/math/creating-and-concatenating-matrices.html
- Matrices and Arrays - https://www.mathworks.com/help/matlab/matrices-and-arrays.html
Storing output values from a for loop into an "array"
조회 수: 6 (최근 30일)
이전 댓글 표시
Hello everyone,
I am trying to output the values that I get from a for loop into an "array". I am not sure how to store those "list of values" into an array
I have attached my code in reference:
Storing_Values_Into_Array.m
close all; clc;
% Value of j
j = 1i;
% For the region k_o < k_p < sqrt(u_r*e_r)*k_o
% Wavenumber in free space value = k_o
k = 2*pi;
% Permeability Value = u_r
u_r = 1;
% Permittivity Value e_r
e_r = 2.2;
% Value of kz_1
kz_1 = @(kp) sqrt((k).^2*e_r*u_r - (kp).^2);
% Value of kz_2
kz_2 = @(kp) sqrt((kp).^2 - (k).^2);
% Substrate heights = d
D = [0.02 0.04 0.06 0.08 0.10];
% Using a for loop to calculate the roots for T_M
% Solving for k_p values
for i=1:numel(D)
d=D(i);
% Equations for TM(kp)
T_M = @(kp) kz_1(kp).*sin(d.*kz_1(kp)) - e_r*kz_2(kp).*cos(d.*kz_1(kp));
kp_root=[fzero(T_M, [k , k*sqrt(e_r*u_r)])]
fplot(T_M,[k k*sqrt(e_r*u_r)], 'LineWidth',3); hold on
plot(kp_root,0,'o','MarkerSize',8,'MarkerFaceColor','k');
ylim([-5 5]);
xlim([k k*sqrt(e_r*u_r)]);
title('T_M vs k_p')
ylabel('T_M')
xlabel('k_p')
grid on;
ax = gca;
ax.GridLineWidth = 2;
end; hold off
%{
What I am trying to do is store the values I get from "kp_root" in an
array called "kp_list" so I can use that array for calculations later on.
%}
댓글 수: 0
채택된 답변
Ayush Modi
2024년 7월 18일
편집: Ayush Modi
2024년 7월 18일
Hi Ammar,
I am assuming you want to append the kp_root values you obtain in each iteration of for loop and store them in the variable kp_list. You can achieve it by concatenation.
Here is code snippet for your reference -
% Initialize an empty array kp_list before the for loop
kp_list = []
% After you get the value of kp_root in for loop, concatenate kp_root to kp_list
kp_root=[fzero(T_M, [k , k*sqrt(e_r*u_r)])]
kp_list = [kp_list kp_root]
For more information refer to the following MathWorks documentation:
추가 답변 (1개)
Vandit
2024년 7월 18일
Hello Ammar,
To store the values from "kp_root" in an array called "kp_list", you can initialize an empty array before the for loop and then append each value of "kp_root" to the array inside the loop. Here's the updated code with the "disp" command at the end to display the values stored in the "kp_list" array:
close all; clc;
% Value of j
j = 1i;
% For the region k_o < k_p < sqrt(u_r*e_r)*k_o
% Wavenumber in free space value = k_o
k = 2*pi;
% Permeability Value = u_r
u_r = 1;
% Permittivity Value e_r
e_r = 2.2;
% Value of kz_1
kz_1 = @(kp) sqrt((k).^2*e_r*u_r - (kp).^2);
% Value of kz_2
kz_2 = @(kp) sqrt((kp).^2 - (k).^2);
% Substrate heights = d
D = [0.02 0.04 0.06 0.08 0.10];
% Initialize kp_list array
kp_list = [];
% Using a for loop to calculate the roots for T_M
% Solving for k_p values
for i = 1:numel(D)
d = D(i);
% Equations for TM(kp)
T_M = @(kp) kz_1(kp).*sin(d.*kz_1(kp)) - e_r*kz_2(kp).*cos(d.*kz_1(kp));
kp_root = fzero(T_M, [k , k*sqrt(e_r*u_r)]);
kp_list = [kp_list, kp_root]; % Append kp_root to kp_list
fplot(T_M, [k k*sqrt(e_r*u_r)], 'LineWidth', 3); hold on
plot(kp_root, 0, 'o', 'MarkerSize', 8, 'MarkerFaceColor', 'k');
ylim([-5 5]);
xlim([k k*sqrt(e_r*u_r)]);
title('T_M vs k_p')
ylabel('T_M')
xlabel('k_p')
grid on;
ax = gca;
ax.GridLineWidth = 2;
end
hold off
disp(kp_list);
In the above code snippet, an empty array "kp_list" is initialized before the loop, and the roots found in each iteration(kp_root) are appended to "kp_list" inside the loop so that "kp_list" will contain all the roots after the loop.
To know more about Matrices and Arrays in MATLAB, you can refer to the following documentation:
Hope this helps.
댓글 수: 0
참고 항목
카테고리
Help Center 및 File Exchange에서 Creating and Concatenating Matrices에 대해 자세히 알아보기
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!