contourf plot value not corresponding to the legend bar value
조회 수: 6 (최근 30일)
이전 댓글 표시
I have a general question about a contourf() plot that I am plotting. The plot is shown in the screenshot below. What I am confused about is why different z-value (Level, in this case) have the same color. The plot only have two colors, blue and red, while there are many different values ranging from .22 to .26. For example, with Level value of .26, I am expecting it to be black, according to the bar on the right hand side, and .255 to be darker blue, and .2575 to be black as well, but it's only one shade of blue. It looks like anything above .25 is blue, and anything below is red. Can anyone shine some light on what is happening?
Here is my code.
close('all'), clear, clc
f1 = figure;
ax = axes(f1);
load('data.mat')
smplX = reshape(smplX,[],1);
smplY = reshape(smplY,[],1);
smplZ = reshape(smplZ,[],1);
xLimits = [round(min(smplX)-1) round(max(smplX)+1)];
yLimits = [round(min(smplY)-1) round(max(smplY)+1)];
[xq,yq] = meshgrid(xLimits(1):0.5:xLimits(2),yLimits(1):0.5:yLimits(2));
zq2 = griddata(smplX,smplY,smplZ,xq,yq,'linear');
if any(isnan(zq2))
% zq3 = griddata(smplX,smplY,smplZ,xq,yq,'nearest');
% idx = isnan(zq2);
% zq2(idx)=zq3(idx);
zq2 = griddata(smplX,smplY,smplZ,xq,yq,'nearest');
end
contourf(ax,xq,yq,zq2);
c = colormap(ax,flipud(turbo()));
ax.CLim = [0.22 max(zq2,[],'all')];
cInc = (ax.CLim(2)-ax.CLim(1))/256;
cInc = round((0.25 - ax.CLim(1))/cInc);
if cInc>size(c,1)
cInc = size(c,1);
disp(size(c,1));
end
% rectangle(ax,'Position',[-xLimits(1) yLimits(1) ...
% xLimits(2)-xLimits(1) ...
% yLimits(2)-yLimits(1)],...
% 'FaceColor',...
% c(cInc,:),'LineWidth',2)
ax.XLimitMethod = "tight";
ax.YLimitMethod = "tight";
ax.Children = ax.Children(end:-1:1);
colorbar(ax,"eastoutside")
댓글 수: 0
채택된 답변
Voss
2023년 12월 14일
"It looks like anything above .25 is blue, and anything below is red."
This is happening because of the levels that contourf chose. Take a look at the levels by taking the second output from contourf, the contour object, and inspecting its 'LevelList' property:
f1 = figure;
ax = axes(f1);
load('data.mat')
smplX = reshape(smplX,[],1);
smplY = reshape(smplY,[],1);
smplZ = reshape(smplZ,[],1);
xLimits = [round(min(smplX)-1) round(max(smplX)+1)];
yLimits = [round(min(smplY)-1) round(max(smplY)+1)];
[xq,yq] = meshgrid(xLimits(1):0.5:xLimits(2),yLimits(1):0.5:yLimits(2));
zq2 = griddata(smplX,smplY,smplZ,xq,yq,'linear');
if any(isnan(zq2))
% zq3 = griddata(smplX,smplY,smplZ,xq,yq,'nearest');
% idx = isnan(zq2);
% zq2(idx)=zq3(idx);
zq2 = griddata(smplX,smplY,smplZ,xq,yq,'nearest');
end
[~,c_obj] = contourf(ax,xq,yq,zq2);
c = colormap(ax,flipud(turbo()));
ax.CLim = [0.22 max(zq2,[],'all')];
cInc = (ax.CLim(2)-ax.CLim(1))/256;
cInc = round((0.25 - ax.CLim(1))/cInc);
if cInc>size(c,1)
cInc = size(c,1);
disp(size(c,1));
end
% rectangle(ax,'Position',[-xLimits(1) yLimits(1) ...
% xLimits(2)-xLimits(1) ...
% yLimits(2)-yLimits(1)],...
% 'FaceColor',...
% c(cInc,:),'LineWidth',2)
ax.XLimitMethod = "tight";
ax.YLimitMethod = "tight";
ax.Children = ax.Children(end:-1:1);
colorbar(ax,"eastoutside")
disp(c_obj.LevelList)
Those levels are not particularly suitable to your data. Only one of them (0.25) is within the range of data you care about. You can specify your own levels as input to contourf instead. For example:
f1 = figure;
ax = axes(f1);
load('data.mat')
smplX = reshape(smplX,[],1);
smplY = reshape(smplY,[],1);
smplZ = reshape(smplZ,[],1);
xLimits = [round(min(smplX)-1) round(max(smplX)+1)];
yLimits = [round(min(smplY)-1) round(max(smplY)+1)];
[xq,yq] = meshgrid(xLimits(1):0.5:xLimits(2),yLimits(1):0.5:yLimits(2));
zq2 = griddata(smplX,smplY,smplZ,xq,yq,'linear');
if any(isnan(zq2))
% zq3 = griddata(smplX,smplY,smplZ,xq,yq,'nearest');
% idx = isnan(zq2);
% zq2(idx)=zq3(idx);
zq2 = griddata(smplX,smplY,smplZ,xq,yq,'nearest');
end
[~,c_obj] = contourf(ax,xq,yq,zq2,'LevelList',[0 linspace(0.22,0.26,5)]);
c = colormap(ax,flipud(turbo()));
ax.CLim = [0.22 max(zq2,[],'all')];
cInc = (ax.CLim(2)-ax.CLim(1))/256;
cInc = round((0.25 - ax.CLim(1))/cInc);
if cInc>size(c,1)
cInc = size(c,1);
disp(size(c,1));
end
% rectangle(ax,'Position',[-xLimits(1) yLimits(1) ...
% xLimits(2)-xLimits(1) ...
% yLimits(2)-yLimits(1)],...
% 'FaceColor',...
% c(cInc,:),'LineWidth',2)
ax.XLimitMethod = "tight";
ax.YLimitMethod = "tight";
ax.Children = ax.Children(end:-1:1);
colorbar(ax,"eastoutside")
disp(c_obj.LevelList)
I'm not sure that makes for a clear contour plot, but now you've got plenty of color variation.
추가 답변 (0개)
참고 항목
카테고리
Help Center 및 File Exchange에서 Contour Plots에 대해 자세히 알아보기
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!