xcp on serial Custom board c2000

조회 수: 71 (최근 30일)
ali
ali 2023년 8월 20일
답변: ali 2023년 8월 26일
I connected my custom c2000 320f28335 mcu board via sci_a with com port to simulink for xcp debugging, but there is time out error on connection.
Is there any specific hardware configuration?
matlab version 2022b.
the error is :
Could not connect to target application: XCP internal error: timeout expired, in response to XCP CONNECT command
  댓글 수: 1
ali
ali 2023년 8월 23일
Sci-a connected to pc via USB to TTL device, on com port and I configured this port number in hardware configuration in simiulink and also I checked pin number of sci-a

댓글을 달려면 로그인하십시오.

이 질문에 답변하려면 로그인하십시오.

채택된 답변

ali
ali 2023년 8월 26일
in my case the problem was due to Gnd connection of board and USB to TTL device, I had not connected Gnd,
after I connect it, external mode works correctly

추가 답변 (0개)

카테고리

Help Center 및 File Exchange에서 Deployment, Integration, and Supported Hardware에 대해 자세히 알아보기

태그

제품


릴리스

R2022b

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by