Custom Storage Class Parameters not shown in A2L

Hi all,

i created a custom storage class with the cscdesigner (custom struct definition with a definition of specific memory section).

Now when i try to export an a2l file from the model/code these parameters are not showing up.

I tried to look for similar questions e.g. similarQuestion but at least to my knowledge non of the points described there apply to the storage class i created..

Other Parameters with default storage or inputs/outputs are showing up as they should.

Best Regards

Tobias

Answer 1

[Ayush]

Hi @Tobias Doser,

To make sure that the signals are represented in the generated A2L file, please set the "SupportSILPIL" property to "true" in the CSC definition as outlined in the following documentation page:

https://www.mathworks.com/help/releases/R2022b/ecoder/ug/about-sil-and-pil-simulations.html#mw_24c7930c-fb02-44fd-9c7b-5535036f5c23

Note that you do not have to be using SIL/PIL testing for this to work. The "SupportSILPIL" property has implications on the generated code, and the A2L file depends on the code that is generated.