Data Acquisition from NI PXIe-6739

Hi,

I want to use NI PXIe-6739 as analog voltage output to work with other parts. So what I want to ask is that if I can use Data Acquisition Toolbox to control the output of the device and read the data. I have learnt that this worked with other NI PXIe modules (like PXIe-6535, PXIe-6536 and PXIe-6537), just want to make sure it can also work on NI PXIe-6739.

Thanks!

Answer 1

[Rasmita]

Hi,

As per my understanding, you would like to use Data Acquisition Toolbox to control the output of the device and read the data, while using NI PXIe-6739 as analog voltage output.

Note that you can use the Data Acquisition Toolbox to control the output of the NI PXIe-6739 and read the data. The toolbox supports the communication protocol NI-DAQmx, which is used to communicate with National Instruments data acquisition devices.

However, please note that need to install and configure the NI-DAQmx driver to use the NI PXIe-6739 device with MATLAB and the Data Acquisition Toolbox.

For more information on using the Data Acquisition Toolbox to control the output of the device and read the data, please refer to the following documentation:

https://www.mathworks.com/help/daq/daq.interfaces.dataacquisition.html

Hope this helps!

Regards,

Rasmita