![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/1143170/image.png)
Simulink Support Package for Raspberry Pi Hardware not working on Raspberry Pi 4B 8GB (2022)
조회 수: 6 (최근 30일)
이전 댓글 표시
Hey there,
I have just bought a Raspberry pi 4B 8gb. Former was Pi 4B 4GB. Although there is no problem with 4GB version ( I can use even external mode of Simulink with 4 GB version), newer one does not take image of Raspbian correctly. When I write image file to the SD card and insert it, on the black screen i see an error like ' does not support this version. use the latest version from raspberrypi.com'. So, i need a full image of Raspbian bullseye which includes Simulink support package.
Anybody has the same problem?
Thanks in advance.
Raspberry Pi 4B 8 GB
Matlab R2021a
댓글 수: 0
채택된 답변
Prasanth Sunkara
2022년 10월 3일
Hi Haris,
One quick alternate way to set up pi's OS with libraries and packages is using " Customizing the existing Raspbain OS " option of hardware setup app.
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/1143170/image.png)
As mentioned in our earlier conversations, bullseye is not officially supported by MathWorks. You can try the legacy Buster version and run the hardware setup app as mentioned above
https://www.raspberrypi.com/software/operating-systems/ (look for buster legacy option)
Hope it helps!
Thanks,
Prasanth
추가 답변 (1개)
Walter Roberson
2022년 10월 3일
It will not exactly be "fun", but if you look at https://github.com/mathworks/Raspbian_OS_Setup you can see a list of packages you need to include to generate a custom image file.
참고 항목
카테고리
Help Center 및 File Exchange에서 Raspberry Pi Hardware에 대해 자세히 알아보기
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!