plot function of two variables as one variable

조회 수: 5 (최근 30일)
University Glasgow
University Glasgow 2022년 8월 17일
댓글: Torsten 2022년 8월 17일
I want to plot theta in the middle of the layer by setting z=d/2, for t=0..100. I have attached the snapshot of what I'm expecting. See my code below:
%% initialization
clear
clc
close all
%% Model parameters
global k1 eta1 alpha3 gamma1 d N Phi xi h A B C G
k1 = 6*10^(-12); % elastic constant
eta1 = 0.0240; % viscosity
xi = 0.06; % activity parameter
alpha3 = -0.001104; % viscosity
gamma1 = 0.1093; % viscosity
Theta = 0.0001;
% Simplify model parameters
A = k1/gamma1;
B = alpha3/gamma1;
C = eta1 - alpha3*B;
G = alpha3*A;
d = 0.0002;
N = 20;
%% Numerical setup
% step size
h = d/N;
% t span
tspan = [0 100];
% range of z
%z=linspace(0,d/2,N+1)
z=linspace(0,d,N+1);
% initial conditions
theta0 = Theta*sin(pi*z/d);
v0 = zeros(1,N+1);
theta0_int=theta0(2:N);
v0_int=v0(2:N);
u0 = [theta0_int'; v0_int'];
% Constant mass matrix M: We use M to represent the left hand side of the system of equations.
M1=eye(N-1,N-1);
M2=zeros(N-1,N-1);
M=[M1 M2;M2 M2];
% Boundary Conditions
Phi = 0;
%% ode solver
options = odeset('Mass',M,'RelTol',1e-4,'AbsTol',1e-6);
[t,y] = ode15s(@lcode1,tspan,u0, options);
% Extract the solution for theta and v
theta = [Phi*ones(length(t), 1) y(:,1:N-1) Phi*ones(length(t), 1)];
v = [zeros(length(t), 1) y(:,N:(2*N-2)) zeros(length(t), 1)];
%% Plot the solution.
figure
plot(z, theta(end,:))
xlabel('z(\mum)')
ylabel('\theta(z,t)(rad)')
title('Director angle plot')
%% Functions
% Right hand side of the ODEs: F(U)
function rhsode = lcode1(t,y)
global Phi xi h A B C G N
% initialize theta and v
theta = y(1:(N-1));
v = y(N:(2*N-2));
% theta equations
% theta equations
% for the positon to the right of the left hand boundary z=0
rhsode(1,1) = (A/(h^2))*(theta(2)-2*theta(1)+ Phi) - (B/(2*h))*(v(2)-0);
% for all other internal positions 0<z<d
for i=2:(N-2)
rhsode(i,1) = (A/(h^2))*(theta(i+1)-2*theta(i)+theta(i-1)) - (B/(2*h))*(v(i+1)-v(i-1));
end
% for the positon to the left of the right hand boundary z=d
rhsode(N-1,1) = (A/(h^2))*(Phi-2*theta(N-1)+ theta(N-2)) - (B/(2*h))*(0-v(N-2));
% v equations [REMEMBER theta the RHS index for the v equations is N-1 more than the indices of the theta and v variables in this function]
% for the two positons to the right of the left hand boundary z=0
rhsode(N,1) = (G/(h^3))*(-Phi + 3*theta(1) - 3*theta(2) + theta(3)) + (C/(h^2))*(v(2) -2*v(1)+ 0) + (xi/(2*h))*(theta(2)-Phi);
rhsode(N+1,1) = (G/(2*h^3))*(Phi - 2*theta(1) + 2*theta(3)- theta(4)) + (C/(h^2))*(v(3) -2*v(2) + v(1)) + (xi/(2*h))*(theta(3)-theta(1));
% for all other internal positions 0<z<d
for i=(N+2):(2*N-4)
rhsode(i,1) = (G/(2*h^3))*(theta(i-2-(N-1)) - 2*theta(i-1-(N-1)) + 2*theta(i+1-(N-1))- theta(i+2-(N-1))) +(C/(h^2))*(v(i+1-(N-1)) -2*v(i-(N-1)) + v(i-1-(N-1))) + (xi/(2*h))*(theta(i+1-(N-1))-theta(i-1-(N-1)));
end
% for the two positons to the left of the right hand boundary z=d
rhsode(2*N-3,1) = (G/(2*h^3))*(theta(N-4) - 2*theta(N-3) + 2*theta(N-1) - Phi) +(C/(h^2))*(v(N-1) -2*v(N-2) + v(N-3)) + (xi/(2*h))*(theta(N-1)-theta(N-3));
rhsode(2*N-2,1) = (G/(h^3))*(-theta(N-3) + 3*theta(N-2) - 3*theta(N-1) + Phi) +(C/(h^2))*(0 -2*v(N-1) + v(N-2)) + (xi/(2*h))*(Phi-theta(N-2));
end

채택된 답변

Torsten
Torsten 2022년 8월 17일
편집: Torsten 2022년 8월 17일
%% initialization
clear
clc
close all
%% Model parameters
global k1 eta1 alpha3 gamma1 d N Phi xi h A B C G
k1 = 6*10^(-12); % elastic constant
eta1 = 0.0240; % viscosity
xi = 0.06; % activity parameter
alpha3 = -0.001104; % viscosity
gamma1 = 0.1093; % viscosity
Theta = 0.0001;
% Simplify model parameters
A = k1/gamma1;
B = alpha3/gamma1;
C = eta1 - alpha3*B;
G = alpha3*A;
d = 0.0002;
N = 20;
%% Numerical setup
% step size
h = d/N;
% t span
tspan = [0 230];
% range of z
%z=linspace(0,d/2,N+1)
z=linspace(0,d,N+1);
% initial conditions
theta0 = Theta*sin(pi*z/d);
v0 = zeros(1,N+1);
theta0_int=theta0(2:N);
v0_int=v0(2:N);
u0 = [theta0_int'; v0_int'];
% Constant mass matrix M: We use M to represent the left hand side of the system of equations.
M1=eye(N-1,N-1);
M2=zeros(N-1,N-1);
M=[M1 M2;M2 M2];
% Boundary Conditions
Phi = 0;
%% ode solver
options = odeset('Mass',M,'RelTol',1e-4,'AbsTol',1e-6);
[t,y] = ode15s(@lcode1,tspan,u0, options);
theta_middle = y(:,N/2);
plot(t,theta_middle)
% Extract the solution for theta and v
%theta = [Phi*ones(length(t), 1) y(:,1:N-1) Phi*ones(length(t), 1)];
%v = [zeros(length(t), 1) y(:,N:(2*N-2)) zeros(length(t), 1)];
%% Plot the solution.
%figure
%plot(z, theta(end,:))
%xlabel('z(\mum)')
%ylabel('\theta(z,t)(rad)')
%title('Director angle plot')
%% Functions
% Right hand side of the ODEs: F(U)
function rhsode = lcode1(t,y)
global Phi xi h A B C G N
% initialize theta and v
theta = y(1:(N-1));
v = y(N:(2*N-2));
% theta equations
% theta equations
% for the positon to the right of the left hand boundary z=0
rhsode(1,1) = (A/(h^2))*(theta(2)-2*theta(1)+ Phi) - (B/(2*h))*(v(2)-0);
% for all other internal positions 0<z<d
for i=2:(N-2)
rhsode(i,1) = (A/(h^2))*(theta(i+1)-2*theta(i)+theta(i-1)) - (B/(2*h))*(v(i+1)-v(i-1));
end
% for the positon to the left of the right hand boundary z=d
rhsode(N-1,1) = (A/(h^2))*(Phi-2*theta(N-1)+ theta(N-2)) - (B/(2*h))*(0-v(N-2));
% v equations [REMEMBER theta the RHS index for the v equations is N-1 more than the indices of the theta and v variables in this function]
% for the two positons to the right of the left hand boundary z=0
rhsode(N,1) = (G/(h^3))*(-Phi + 3*theta(1) - 3*theta(2) + theta(3)) + (C/(h^2))*(v(2) -2*v(1)+ 0) + (xi/(2*h))*(theta(2)-Phi);
rhsode(N+1,1) = (G/(2*h^3))*(Phi - 2*theta(1) + 2*theta(3)- theta(4)) + (C/(h^2))*(v(3) -2*v(2) + v(1)) + (xi/(2*h))*(theta(3)-theta(1));
% for all other internal positions 0<z<d
for i=(N+2):(2*N-4)
rhsode(i,1) = (G/(2*h^3))*(theta(i-2-(N-1)) - 2*theta(i-1-(N-1)) + 2*theta(i+1-(N-1))- theta(i+2-(N-1))) +(C/(h^2))*(v(i+1-(N-1)) -2*v(i-(N-1)) + v(i-1-(N-1))) + (xi/(2*h))*(theta(i+1-(N-1))-theta(i-1-(N-1)));
end
% for the two positons to the left of the right hand boundary z=d
rhsode(2*N-3,1) = (G/(2*h^3))*(theta(N-4) - 2*theta(N-3) + 2*theta(N-1) - Phi) +(C/(h^2))*(v(N-1) -2*v(N-2) + v(N-3)) + (xi/(2*h))*(theta(N-1)-theta(N-3));
rhsode(2*N-2,1) = (G/(h^3))*(-theta(N-3) + 3*theta(N-2) - 3*theta(N-1) + Phi) +(C/(h^2))*(0 -2*v(N-1) + v(N-2)) + (xi/(2*h))*(Phi-theta(N-2));
end
  댓글 수: 5
University Glasgow
University Glasgow 2022년 8월 17일
I tried this ax = gca;
% Requires R2020a or later
exportgraphics(ax,'myplot.png','Resolution',300) but is saving only one of my plot.
%% initialization
clear
clc
close all
%% Model parameters
global k1 eta1 alpha3 gamma1 d N Phi xi h A B C G
k1 = 6*10^(-12); % elastic constant
eta1 = 0.0240; % viscosity
xi = -1; % activity parameter
alpha3 = -0.001104; % viscosity
gamma1 = 0.1093; % viscosity
Theta = 0.0001;
% Simplify model parameters
A = k1/gamma1;
B = alpha3/gamma1;
C = eta1 - alpha3*B;
G = alpha3*A;
d = 0.0002;
N = 200;
%% Numerical setup
% step size
h = d/N;
% t span
tspan = [0 100];
% range of z
%z=linspace(0,d/2,N+1)
z=linspace(0,d,N+1);
% initial conditions
theta0 = Theta*sin(pi*z/d);
v0 = zeros(1,N+1);
theta0_int=theta0(2:N);
v0_int=v0(2:N);
u0 = [theta0_int'; v0_int'];
% Constant mass matrix M: We use M to represent the left hand side of the system of equations.
M1=eye(N-1,N-1);
M2=zeros(N-1,N-1);
M=[M1 M2;M2 M2];
% Boundary Conditions
Phi = 0;
%% ode solver
options = odeset('Mass',M,'RelTol',1e-4,'AbsTol',1e-6);
[t,y] = ode15s(@lcode1,tspan,u0, options);
theta_middle = y(:,N/2); % theta at the middle of the layer (i.e., z=d/2)
% Extract the solution for theta and v
theta = [Phi*ones(length(t), 1) y(:,1:N-1) Phi*ones(length(t), 1)];
v = [zeros(length(t), 1) y(:,N:(2*N-2)) zeros(length(t), 1)];
%% Plot the solution.
figure
subplot(2,2,1)
plot(z, theta(1:5,:))
xlabel('z(\mum)')
ylabel('\theta(z,t)(rad)')
title('Director angle','FontSize',10)
%[xmin(z) xmax(z) ymin(theta) ymax(theta)];
subplot(2,2,2)
plot(z, v(1:5,:))
xlabel('z(\mum)')
ylabel('v(z,t)(m/s)')
title('Flow velocity')
%[xmin(z) xmax(z) ymin(theta) ymax(theta)];
subplot(2,2,3)
plot(t,theta_middle)
xlabel('z(\mum)')
ylabel('\theta(d/2,t)(rad)')
title('Director angle at the middle of the layer', 'FontSize',6)
ax = gca;
% Requires R2020a or later
exportgraphics(ax,'modelplot.png','Resolution',300)
%% Functions
% Right hand side of the ODEs: F(U)
function rhsode = lcode1(t,y)
global Phi xi h A B C G N
% initialize theta and v
theta = y(1:(N-1));
v = y(N:(2*N-2));
rhsode(1,1) = (A/(h^2))*(theta(2)-2*theta(1)+ Phi) - (B/(2*h))*(v(2)-0);
% for all other internal positions 0<z<d
for i=2:(N-2)
rhsode(i,1) = (A/(h^2))*(theta(i+1)-2*theta(i)+theta(i-1)) - (B/(2*h))*(v(i+1)-v(i-1));
end
% for the positon to the left of the right hand boundary z=d
rhsode(N-1,1) = (A/(h^2))*(Phi-2*theta(N-1)+ theta(N-2)) - (B/(2*h))*(0-v(N-2));
rhsode(N,1) = (G/(h^3))*(-Phi + 3*theta(1) - 3*theta(2) + theta(3)) + (C/(h^2))*(v(2) -2*v(1)+ 0) + (xi/(2*h))*(theta(2)-Phi);
rhsode(N+1,1) = (G/(2*h^3))*(Phi - 2*theta(1) + 2*theta(3)- theta(4)) + (C/(h^2))*(v(3) -2*v(2) + v(1)) + (xi/(2*h))*(theta(3)-theta(1));
% for all other internal positions 0<z<d
for i=(N+2):(2*N-4)
rhsode(i,1) = (G/(2*h^3))*(theta(i-2-(N-1)) - 2*theta(i-1-(N-1)) + 2*theta(i+1-(N-1))- theta(i+2-(N-1))) +(C/(h^2))*(v(i+1-(N-1)) -2*v(i-(N-1)) + v(i-1-(N-1))) + (xi/(2*h))*(theta(i+1-(N-1))-theta(i-1-(N-1)));
end
% for the two positons to the left of the right hand boundary z=d
rhsode(2*N-3,1) = (G/(2*h^3))*(theta(N-4) - 2*theta(N-3) + 2*theta(N-1) - Phi) +(C/(h^2))*(v(N-1) -2*v(N-2) + v(N-3)) + (xi/(2*h))*(theta(N-1)-theta(N-3));
rhsode(2*N-2,1) = (G/(h^3))*(-theta(N-3) + 3*theta(N-2) - 3*theta(N-1) + Phi) +(C/(h^2))*(0 -2*v(N-1) + v(N-2)) + (xi/(2*h))*(Phi-theta(N-2));
end
Torsten
Torsten 2022년 8월 17일
Sorry, but I have no experience in optimizing graphics output.
Maybe you should open a new question.

댓글을 달려면 로그인하십시오.

추가 답변 (0개)

카테고리

Help CenterFile Exchange에서 General Physics에 대해 자세히 알아보기

태그

제품


릴리스

R2022a

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by