필터 지우기
필터 지우기

What is the nominal parameters of the battery used in "Lithium Battery Cell - Two RC" model? and the type of the battery model?

조회 수: 7 (최근 30일)
Can you please let me know the "type of battery" and its basic parameters like "capacity" and "nominal voltage" which has been used in the model "Lithium Battery Cell - Two RC" i.e. "ssc_lithium_cell_2RC" although the parameter look up table available does'nt precisely mention the nominal parameters which are used to define a battery. Please help me with this.

답변 (1개)

Javier Gazzarri
Javier Gazzarri 2023년 1월 24일
Hello Vikas,
The parameterization of the battery cell in this example is done as a function of SOC and temperature with a grid of breakpoints for both of these states upon which all parameters depend. The nominal voltage of a cell is typically quoted as an intermediate point between the minimum and maximum voltages, measured at 0 and 100% SOC, respectively. In this case, ~3.3V.
With capacity we need to be careful with how to define it. Total capacity is the maximum capacity extractable from the cell at vanishingly small current and 25ºC, while discharge capacity refers to the charge extractable from the battery under specified load and environmental conditions. Typically "nominal" makes reference to the latter, is this your case also?
Please let me know if this makes sense.
Best regards,
Javier

카테고리

Help CenterFile Exchange에서 Battery Pack Modeling에 대해 자세히 알아보기

제품


릴리스

R2021b

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by