When I run this breast cancer detection code I get "Size inputs must be scalar. " error. How can I solve it ?

조회 수: 2(최근 30일)
Ali Zulfikaroglu
Ali Zulfikaroglu 2021년 11월 28일
댓글: Ali Zulfikaroglu 2021년 11월 28일
I added image in attachment. " % finding the histogram of the gray level difference image " part I get error like this
Error using zeros
Size inputs must be scalar.
Error in asd (line 171)
hist_data = zeros(size(hist_count),2);
clear all;
close all;
%% Fast Fratcal Coding Method for the detection of microcalcificationin mammograms
% Author 1: Mayank Arya, admin@mamexo.me
% Author 2: Ram Lakhan , lakhan.iitp@gmail.com
% Implementation in brief
% =======================
% In this implementaiton of microcalcification detection, for a mammogram
% medical image range and domain blocks are classified and two adaptive
% thresholds T1 and T2 are are used for the binaryzation before which the
% restored image is median filtered.
% Input
% ======
% A mammogram image name which is need to be set in the variable @imagename
% Output
% ======
% The input mammogram and the dectected mamaogram are shown in two figures
% How to use
% ===========
% To use this program follow the following steps
% STEP 1: Set the image name same as the name of the input image
% STEP 2: Run the program
% STEP 3: Output windows will popup automatically after processing is
% complete
% The following program has been tested on these files from the mias
% database
% imagenames: 'mdb008.pgm','mdb028.pgm','mdb134.pgm','mdb184.pgm'
% Variables used
% ===============
%% STEP 1
% Set the input image name here
imagename = imread('mdb005.png');
%% image is read and resized to size of interest and image paritioning size i.e size of range block and domain block is defined here.
image = imagename;
resized_image = imresize(image,[32,32]);
[l, b] = size(resized_image);
show_image = resized_image;
input_image = double(resized_image);
modeled_input_image = double(zeros(l));
rangesize = 4;
domainsize = 8;
%% Encoding And Decoding of input image
% Search for a matching domain block D which has similar structures as that of R.
% Each of the blocks in the domain search pool is scaled to the size of range blocks to encode range blocks. It is then
% compared with i R using isometric transformations and intensity offset as well as intensity scaling (contrast scaling).
% The transformation w for the range blocks R is defined by:
% w(R) = s �(D) + o
% where s and o are intensity scaling and offset factor.
% s and o are given as
% s = (N*sum(sum(R.D))-(sum(sum(R)) * sum(sum(D))))/(N*sum(sum(R^.2)) - sum(sum(D.^2);
% o = (sum(sum(D)) - s_i * sum(sum(R)))/N;
% where N is total number of pixels in the range block and D is the spatial
% contracted domain blocks under following isometric transformations
% (1) identity,
% (2) rotation through +90�,
% (3) rotation through +180�,
% (4) rotation through ?90�,
% (5) reflection about mid-vertical axis,
% (6) reflection about mid-horizontal axis,
% (7) reflection about first diagonal, and
% (8) reflection about second diagonal.
% The domain block which minimizes the distortion i e is chosen. The distortion is expressed as:
% error = sum(sum((R - (s_i * D+o_i)).^2))
for rangeblock_x = 1:rangesize:b-rangesize+1
for rangeblock_y = 1:rangesize:b-rangesize+1
%% Calculation of range block
range_block = input_image(rangeblock_x:rangeblock_x + rangesize-1,rangeblock_y:rangeblock_y + rangesize-1); %range block matrix
%% Calculation of Dynamic range for range blocks
min_value = min(min(range_block));
max_value = max(max(range_block));
modeled_input_image(rangeblock_x:rangeblock_x + rangesize-1,rangeblock_y:rangeblock_y + rangesize-1) = range_block;
dynamic_range_range = 1- double(min_value)/double(max_value);
%% Test for dynamic range of range blocks to be between 0.05 to 1 for encoded by fractal encoding method
if dynamic_range_range > 0.05 && dynamic_range_range <= 1
min_error = Inf;
for domainblock_x= 1:4:b-domainsize+1
for domainblock_y= 1:4:b-domainsize+1
%% Calculation of domain blocks
domain_block = input_image(domainblock_x:domainblock_x + domainsize-1,domainblock_y:domainblock_y + domainsize-1);
%% Calcultaion of dynamic range for domain blocks
min_value = min(min(domain_block));
max_value = max(max(domain_block));
dynamic_range_domain = 1- double(min_value)/double(max_value);
%% Test for dynamic range of domian blocks for to be used in the encoding of range blocks
if dynamic_range_domain >= 0.07 && dynamic_range_domain <= 0.35
%% Calculation of 8 affine transforamtion to be applied on the domain blocks for finding the best mapping between domain and range blocks
% Resizing the domain block to the size of the
% range blocks
D_scale = imresize(domain_block,[rangesize,rangesize]);
Domain = D_scale;
% Transformation 1: Identity
DT_MAT(1:rangesize, 1:rangesize, 1) = Domain;
% Transformation 2: Rotaion by +90
DT_MAT(1:rangesize, 1:rangesize, 2) = rot90(Domain);
% Transformation 3: Rotation by +180
DT_MAT(1:rangesize, 1:rangesize, 3) = rot90(rot90(Domain));
% Transformation 4: Rotation by -90
DT_MAT(1:rangesize, 1:rangesize, 4) = rot90(rot90(rot90(Domain)));
% Transformation 5: Reflection about mid horizontal
% axis
DT_MAT(1:rangesize, 1:rangesize, 5) = flipud(Domain);
% Transformation 6: Reflection about mid vertical
% axis
DT_MAT(1:rangesize, 1:rangesize, 6) = fliplr(Domain);
% Transformation 7: Rotation about first diagonal
DT_MAT(1:rangesize, 1:rangesize, 7) = transpose(Domain);
% Transformation 8: Rotation about second diagonal
DT_MAT(1:rangesize, 1:rangesize, 8) = rot90(rot90(transpose(Domain)));
% N is the number of pixels in the range block
N = rangesize * rangesize;
%% Finding the best mapping for the range block using current domain block and its 7 other affine transformation
for Loop=1:8
Domain = DT_MAT(1:rangesize, 1:rangesize, Loop);
%% Calulation for intensity scaling factor and intensity offset factor
s_i = (N*sum(sum(range_block.*Domain))-(sum(sum(range_block)) * sum(sum(Domain))))/(N*sum(sum(range_block.^2)) - sum(sum(range_block))^2);
o_i = (sum(sum(Domain)) - s_i * sum(sum(range_block)))/N;
%% Calculation of the error between the range block and the domain block's transformation if this error is less than the minimum error then use this in the decoding process.
error = sum(sum((range_block - (s_i * Domain+o_i)).^2));
if error < min_error
min_error = error;
modeled_input_image(rangeblock_x:rangeblock_x + rangesize-1,rangeblock_y:rangeblock_y + rangesize-1) = s_i *Domain + o_i;
%% Finding the microcalcification by finding the difference between the modelled image and the original image.
% Renaming the variables for better readibilty
original_image = double(input_image);
restored_image = double(modeled_input_image);
%% Applying the median filter to the modelled image or restored image
med_fil_res_image = medfilt2(restored_image);
%% Finding the difference between the original image and the median filtered modelled image
diff_image = double(original_image) - double(med_fil_res_image);
%% Calculation of two adpative thresholds T1 and T2
% finding the histogram of the gray level difference image
hist_count = histcounts(diff_image(:),0:255);
hist_data = zeros(size(hist_count),2);
hist_data(:,1) = [0:255];
hist_data(:,2) = [hist_count+1];
%% Uncomment the following code if you want to see the gray level histogram and the see the calculated centroids for the gray level difference image
axis([0 255 0 250]);
title 'Histogram of difference image';
%CALCULATION pf histogram centres using k means algorithm
opts = statset('Display','final');
[idx,C] = kmeans(hist_data,2,'Distance','cityblock','Replicates',5,'Options',opts);
hold on
legend('Cluster 1','Cluster 2','Centroids','Location','NW')
title ('Cluster Assignments and Centroids')
hold off
%% Calculation of T1 and T2 using the first cluster center and the mean and standard devaition of the image respectively.
%% Calculation of T1
C = sort(C);
t = 0.5; % t is constant
T1 = t * C(1);
%% Calcutaion of T2
m = mean(mean(original_image));
sigma = std(std(original_image));
k = 1.56;
T2 = m - k * sigma;
%% Binarization process
%create a variable to hold the image after binarization process
final_image = zeros(size(restored_image));
for input_image=1:l
for y=1:l
% Test if the pixel value in the difference image is greater than threshold T1 and the gray level value in the original image is greater than the threshold T2.
if diff_image(input_image,y) > T1 && original_image(input_image,y) > T2
final_image(input_image,y) = 255;
final_image(input_image,y) = 0;
%% Showing the input image or mammogram and the processed image afer binarization or the detected microcalcification
imshow([show_image final_image]);
%% Uncoment the upcoming section to see Some intermediate results.
% figure;
% imshow(show_image);
% title('Input mammogram image')
% figure;
% imshow(restored_image);
% title('Modeled input mammogram using fratal modelling')
% figure;
% imshow(med_fil_res_image);
% title('Median filtered modelled image')
% figure;
% imshow(diff_image);
% title('Detected microcalcification by difference mechanism between original and modelled image')
% figure;
% imshow(final_image);
% title('Detected microcalcification after applying bianrization process ')
  댓글 수: 1
Jan 2021년 11월 28일
Are you sure, that this is wanted:
sigma = std(std(original_image));
Or do you mean:
sigma = std(original_image, 0, 'all');
Using "error" and "image" as names of variables shadows the builtin function with the same names. This is not a syntax error, but it causes troubles frequently.

댓글을 달려면 로그인하십시오.


VBBV 2021년 11월 28일
편집: VBBV 2021년 11월 28일
hist_data = zeros(size(round(hist_count)));
When you use hist_count as dimension for hist_data it takes size values from hist_count.so truncate the values to integers to set the dimension of hist_data to as many zeros as size of hist_count without additional arguments.
  댓글 수: 1
Ali Zulfikaroglu
Ali Zulfikaroglu 2021년 11월 28일
This time it gives this error just 1 row below code
Unable to perform assignment because the size of the left side is 1-by-1 and the size of
the right side is 1-by-256.
Error in asd (line 173)
hist_data(:,1) = (0:255);

댓글을 달려면 로그인하십시오.

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by