# How to plot three subplots on the same axis?

조회 수: 16(최근 30일)
Ammy 2021년 9월 27일
댓글: Ammy 2021년 9월 27일
if true
% figure(1)
x1=subplot(2,1,1);
stairs(DDr.Var1,DDr.Var2);
legend('Station 1 LHS')
ylabel('Cycle time')
title('Station 1 RHS & LHS hourly mean cycle time')
set(gca,'XTickLabel',[]);
ylim([0 105]);
x2=subplot(2,1,2);
stairs(DDr.Var1,DDr.Var3);
ylabel('Cycle time')
legend(' Station 1 RHS')
ylim([0 105]);
p1 = get(x1, 'Position');
p2 = get(x2, 'Position');
p1(2) = p2(2)+p2(4);
set(x1, 'pos', p1);
xlabel('Time')
end
I found the above code for two subplot on the same axis,
I want to plot three subplots on the same x-axis without any gap between them.
I have made the following changes
if true
% figure(1)
x1=subplot(3,1,1);
stairs(DDr.Var1,DDr.Var2);
legend('Station 1 LHS')
ylabel('Cycle time')
title('Station 1 RHS & LHS hourly mean cycle time')
set(gca,'XTickLabel',[]);
ylim([0 105]);
x2=subplot(3,1,2);
stairs(DDr.Var1,DDr.Var3);
ylabel('Cycle time')
legend(' Station 1 RHS')
ylim([0 105]);
x3=subplot(3,1,3);
stairs(DDr.Var1,DDr.Var3);
ylabel('Cycle time')
legend(' Station 1 RHS')
ylim([0 105]);
Now I want to know how to change the below ?
p1 = get(x1, 'Position');
p2 = get(x2, 'Position');
p1(2) = p2(2)+p2(4);
set(x1, 'pos', p1);
xlabel('Time')
end
##### 댓글 수: 2표시숨기기 이전 댓글 수: 1
Ammy 2021년 9월 27일
No sorry I don't have latest version for that, but thank you very much for the response.

댓글을 달려면 로그인하십시오.

### 채택된 답변

Dave B 2021년 9월 27일
편집: Dave B 2021년 9월 27일
There are a few options better than subplot.
• The easiest thing (as @Mathieu NOE mentions in the comments) is to use stackedplot which was meant for exactly this kind of problem.
• If you have some plotting requirements that stackedplot can't handle, tiledlayout makes this kind of problem much easier, because you can just set the TileSpacing property as you like.
• Finally, if you need to keep using subplot (e.g. if you're on an old release) you can just set the middle axes based on the bottom one, and the top based on the middle.
Here are examples of all three:
Option 1: Use stackedplot
x=linspace(0,2*pi,100)';
y1=sin(x);
y2=cos(x);
y3=tan(x);
stackedplot(x,[y1 y2 y3]) Option 2: Use tiledlayout
figure;
t=tiledlayout(3,1,'TileSpacing','none');
nexttile;
plot(x,y1);
xticks([])
nexttile;
plot(x,y2);
xticks([])
nexttile;
plot(x,y3); Option 3: Keep using subplot:
figure;
ax1=subplot(3,1,1);
plot(x,y1);
xticks([])
ax2=subplot(3,1,2);
plot(x,y2);
xticks([])
ax3=subplot(3,1,3);
plot(x,y3);
ax2.Position(2)=ax3.Position(2)+ax3.Position(4);
ax1.Position(2)=ax2.Position(2)+ax2.Position(4); ##### 댓글 수: 1표시숨기기 없음
Ammy 2021년 9월 27일
@Dave B thank you very much for such a brief explanation.

댓글을 달려면 로그인하십시오.

### Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!