필터 지우기
필터 지우기

value that increase along with changing value by manual switch block simulink using embedded matlab function

조회 수: 2 (최근 30일)
hi all
i just wanna ask,how we do the increasing value by changing manual switch in simulink??
for example: i have manual switch, with 2 constant block connect to it, first signal= 1 , second=0. i have calculation that everytime we change value in manual switch the system will add 10 to the current signal.
how we do it with embedded matlab function??
  댓글 수: 1
Walter Roberson
Walter Roberson 2011년 7월 15일
Duplicate is http://www.mathworks.com/matlabcentral/answers/11705-value-that-increase-along-with-changing-value-in-manual-switch-block-simulink

댓글을 달려면 로그인하십시오.

채택된 답변

Fangjun Jiang
Fangjun Jiang 2011년 7월 15일
Do you have to use EML? If not, it could be done easily in Simulink using a trigger subsystem. Type "sldemo_counters" to open the demo model, connect your manual switch block output to the triggered subsystem. Inside the system, change the trigger from "risgin" to "either", change the constant from 1 to 10 then you got it.

추가 답변 (4개)

Walter Roberson
Walter Roberson 2011년 7월 15일
Please do not open duplicate questions; it just ends up duplicating efforts.
You can edit your previous question if needed.

Kaustubha Govind
Kaustubha Govind 2011년 7월 15일
FWIW, here's an EML implementation:
function y = mycounter(u)
%#eml
persistent count;
persistent prevInput;
firstInput = false;
if isempty(count)
count = 0;
end
if isempty(prevInput)
prevInput = 0;
firstInput = true;
end
if ~firstInput
if (prevInput ~= u)
count=count+1;
end
end
prevInput = u;
y = count;
end

Fangjun Jiang
Fangjun Jiang 2011년 7월 15일
Okay, feed the switch output signal to the triggered subsystem, still choose "either". Also, feed the switch output signal to an Inport of the the triggered subsystem, multiple it by 10, then feed it to an Integrator block. Did not verify. Should work. Try it yourself.
  댓글 수: 3

댓글을 달려면 로그인하십시오.


Luhur
Luhur 2011년 7월 15일
what if i have 3 signal fang??? -1,0,1 ,, if -1 then the current value was be diminished, 0 the value stay still and 1 the value increase.
  댓글 수: 4
Fangjun Jiang
Fangjun Jiang 2011년 7월 15일
If 1 then current value is increased by 10. Increased only once, or every time step as long as the switch output is 1?
Luhur
Luhur 2011년 7월 15일
no only once, the case was the same with the manual switch, but in this case there was 0 and -1 for minus it.
so when curent value is 10, then the signal give 1, then 10 + 10 = 20,, and then the signal gives 0, then 20 + 0 = 20,, and if the signal gives -1, then 20 - 10 = 10,,
so now, the current value is 10.
how is it fang???

댓글을 달려면 로그인하십시오.

카테고리

Help CenterFile Exchange에서 Simulink Functions에 대해 자세히 알아보기

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by