sampling rate and fft
조회 수: 65 (최근 30일)
이전 댓글 표시
Do I need to specify the sampling rate when using FFT? I am wanting to look at frequency response of a signal, and am getting crazy frequency response, way above sampling rate. Sorry for a very basic question, trying to get up to speed.
댓글 수: 0
채택된 답변
Wayne King
2014년 2월 5일
편집: Wayne King
2014년 2월 5일
No, you don't need to specify the sampling rate, but if you wish to create a meaning frequency vector, then you need to know the sampling rate.
For example:
Fs = 1000; % sampling rate of 1000 Hz
t = 0:1/Fs:1-1/Fs;
x = cos(2*pi*100*t)+randn(size(t));
xdft = fft(x);
xdft = xdft(1:length(x)/2+1);
DF = Fs/length(x); % frequency increment
freqvec = 0:DF:Fs/2;
plot(freqvec,abs(xdft))
so the output of fft() is agnostic about frequency, but if you want to interpret that output in physical frequencies, then you need to know the sampling rate.
댓글 수: 3
Wayne King
2014년 2월 6일
I am eliminating 1/2 of the fft() output since it is redundant for a real-valued signal if you are just interested in plotting the magnitude.
The syntax above works for an even length signal without warning is your x, your signal an odd number of samples in length?
If that is the case, do
xdft = xdft(1:floor(length(x)/2)+1);
추가 답변 (0개)
참고 항목
카테고리
Help Center 및 File Exchange에서 Spectral Measurements에 대해 자세히 알아보기
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!