이 번역 페이지는 최신 내용을 담고 있지 않습니다. 최신 내용을 영문으로 보려면 여기를 클릭하십시오.
선로
케이블, 결합 선로, 송전선로
케이블과 선로를 사용하여 단상 전력과 3상 전력을 전송합니다.
Simscape 블록
| AC Cable (Three-Phase) | Three-phase AC power cable |
| Coupled Lines (Pair) | Magnetically couple two lines |
| Coupled Lines (Three-Phase) | Magnetically couple three-phase lines |
| DC Cable | High-fidelity frequency-dependent DC cable (R2025a 이후) |
| Frequency-Dependent Overhead Line (Three-Phase) | Three-phase overhead line which includes effects that vary as a function of frequency |
| Transmission Line | Delay-based, lumped parameter, or distributed transmission line |
| Transmission Line (Three-Phase) | Three-phase transmission line using lumped-parameter pi-section line model |
추천 예제
AC Cable with Bonded Sheaths
A three-phase cable model comprised of multiple pi-sections. Each phase is enclosed in a conductive sheath. The conductive sheath is connected to ground at either end of the cable through a simple resistance. A high-voltage source provides power to an unbalanced resistive load through the power cable. You can configure the sheath to be either series-bonded or cross-bonded. You can also configure the number of pi-sections. Increasing the number of pi-sections improves the accuracy but slows down the simulation. To facilitate convergence, the voltage source includes an internal impedance.
