ctrvmeas
Measurement function for constant turn-rate and velocity-magnitude motion model
Since R2024b
Syntax
Description
returns the expected measurement for a state based on the constant turn-rate and
velocity-magnitude motion model. The measurement
= ctrvmeas(state
)state
argument specifies the
current state.
Note
ctrvmeas
represents velocity in the
xy-plane with velocity magnitude and direction. For the measurement
function for constant turn-rate and velocity-magnitude motion model using Cartesian
components, Vx
and Vy
, see ctmeas
.
also specifies the measurement coordinate system, measurement
= ctrvmeas(state
,frame
)frame
.
also specifies the sensor position, measurement
= ctrvmeas(state
,frame
,sensorpos
)sensorpos
.
also specifies the sensor velocity, measurement
= ctrvmeas(state
,frame
,sensorpos
,sensorvel
)sensorvel
.
specifies the measurement parameters, measurement
= ctrvmeas(state
,measurementParameters
)measurementParameters
.
[
returns the measurement bounds used by a tracking filter (measurement
,bounds
] = ctrvmeas(___)trackingEKF
, trackingUKF
, trackingCKF
,trackingIMM
, trackingMSCEKF
, or trackingGSF
) in residual
calculations. See the HasMeasurementWrapping
property of the filter
object for more details.
Examples
Measure State Using Constant Turn-Rate and Velocity-Magnitude Motion in Rectangular Frame
Define the state of an object in 2-D motion with constant turn rate and constant velocity magnitude. The state includes the position in each dimension, the velocity magnitude, the course direction, and the turn rate. Measurements are in rectangular coordinates, and the z-component of the measurement is zero.
state = [1;10;2;20;5]; measurement = ctrvmeas(state)
measurement = 3×1
1
10
0
Measure State Using Constant Turn-Rate and Velocity-Magnitude Motion in Spherical Frame
Define the state of an object in 3-D motion with constant turn rate and constant velocity magnitude. The state includes the position in each dimension, the velocity magnitude, the course direction, and the turn rate. Measurements are in spherical coordinates. The elevation of the measurement is zero and the range rate is positive indicating that the object is moving away from the sensor.
state = [1;10;2;20;5;1.5;0];
measurement = ctrvmeas(state,'spherical')
measurement = 4×1
84.2894
8.4890
10.1612
0.8581
Measure State Using Constant Turn-Rate and Velocity-Magnitude Motion in Translated Spherical Frame
Define the state of an object in 2-D motion with constant turn rate and constant velocity magnitude. The state includes the position in each dimension, the velocity magnitude, the course direction, and the turn rate. The measurements are in spherical coordinates with respect to a frame located at [20;40;0]
. The elevation of the measurement is zero and the range rate is negative indicating that the object is moving toward the sensor.
state = [1;10;2;20;5];
measurement = ctrvmeas(state,'spherical',[20;40;0])
measurement = 4×1
-122.3474
0
35.5106
-1.5835
Measure State Using Constant Turn-Rate and Velocity-Magnitude Motion with Measurement Parameters
Define the state of an object in 2-D motion with constant turn rate and constant velocity magnitude. The state includes the position in each dimension, the velocity magnitude, the course direction, and the turn rate. The measurements are in spherical coordinates with respect to a sensor located at [-1;-2;0]
, moving at 2 m/s along the x-axis, and rotated by 90 degrees about the z-axis relative to the global frame.The elevation of the measurement is zero and the range rate is positive indicating that the object is moving away from the sensor.
state2d = [1;10;2;20;5];
frame = 'spherical';
sensorpos = [-1;-2;0];
sensorvel = [2;0;0];
laxes = [0 -1 0; 1 0 0; 0 0 1];
measurement = ctrvmeas(state2d,frame,sensorpos,sensorvel,laxes)
measurement = 4×1
-9.4623
0
12.1655
0.6549
Put the measurement parameters in a structure and use the syntax with the measurementParameters
argument.
measparm = struct('Frame',frame,'OriginPosition',sensorpos, ... 'OriginVelocity',sensorvel,'Orientation',laxes); measurement = ctrvmeas(state2d,measparm)
measurement = 4×1
-9.4623
0
12.1655
0.6549
Display Residual Wrapping Bounds
Specify a 2-D state and specify a measurement structure such that the function outputs azimuth, range, and range-rate measurements.
state = [1;10;2;20;5]; mp = struct("Frame","Spherical", ... "HasAzimuth",true, ... "HasElevation",false, ... "HasRange",true, ... "HasVelocity",false);
Output the measurement and wrapping bounds using the ctrvmeas
function.
[measure,bounds] = ctrvmeas(state,mp)
measure = 2×1
84.2894
10.0499
bounds = 2×2
-180 180
-Inf Inf
Input Arguments
state
— Current state
real-valued five-element row or column vector | real-valued seven-element row or column vector | 5-by-N real-valued matrix | 7-by-N real-valued matrix
Current state for constant turn-rate motion, specified as a real-valued vector or matrix.
When you specify the current state as a five-element vector, the state vector describes 2-D motion in the xy-plane. You can specify the state vector as a row or column vector. The components of the state vector are
[x;y;s;theta;omega]
, where:x
andy
represent the x-coordinate and y-coordinate in meters.s
represents the velocity magnitude in meters/second.theta
represents the course direction in the xy-plane, counter-clockwise with respect to the x-axis, in degrees.omega
represents the turn-rate in degrees/second.
When you specify the current state as a seven-element vector, the state vector describes 3-D motion. You can specify the state vector as a row or column vector. The components of the state vector are
[x;y;s;theta;omega;z;vz]
, where:x
andy
represent the x-coordinate and y-coordinate in meters.s
represents the velocity magnitude in meters/second.theta
represents the course direction in the xy-plane, counter-clockwise with respect to the x-axis, in degrees.omega
represents the turn-rate in degrees/second.z
represent the position in the vertical plane in meters.vz
represents velocity component in the vertical plane in meters/second.
When you specify the current state as a 5-by-N or 7-by-N real-valued matrix, each column represents a different state vector, and N represents the number of states.
Example: [0;300;15;40;0.5]
Data Types: single
| double
frame
— Frame to report measurements
'rectangular'
(default) | 'spherical'
Frame to report measurements, specified as 'rectangular'
or
'spherical'
. When you specify frame as
'rectangular'
, a measurement consists of x,
y, and z Cartesian coordinates. When you
specify frame as 'spherical'
, a measurement consists of azimuth,
elevation, range, and range rate.
Data Types: char
| string
sensorpos
— Sensor position
[0;0;0]
(default) | real-valued 3-by-1 column vector
Sensor position with respect to the navigation frame, specified as a real-valued 3-by-1 column vector. Units are in meters.
Data Types: single
| double
sensorvel
— Sensor velocity
[0;0;0]
(default) | real-valued 3-by-1 column vector
Sensor velocity with respect to the navigation frame, specified as a real-valued 3-by-1 column vector. Units are in m/s.
Data Types: single
| double
laxes
— Local sensor axes coordinates
[1,0,0;0,1,0;0,0,1]
(default) | 3-by-3 orthogonal matrix
Local sensor axes coordinates, specified as a 3-by-3 orthogonal matrix. Each column specifies the direction of the local x-, y-, and z-axes, respectively, with respect to the navigation frame. The matrix is the rotation matrix from the global frame to the sensor frame.
Data Types: single
| double
measurementParameters
— Measurement parameters
structure | array of structures
Measurement parameters, specified as a structure or an array of structures. This table lists the fields in the structure.
Field | Description | Example |
---|---|---|
Frame | Frame used to report measurements, specified as one of these values:
Tip In Simulink, when you create an object detection Bus, specify
| 'spherical' |
OriginPosition | Position offset of the origin of the frame relative to the parent frame, specified as an [x y z] real-valued vector. | [0 0 0] |
OriginVelocity | Velocity offset of the origin of the frame relative to the parent frame, specified as a [vx vy vz] real-valued vector. | [0 0 0] |
Orientation | Frame rotation matrix, specified as a 3-by-3 real-valued orthonormal matrix. | [1 0 0; 0 1 0; 0 0 1] |
HasAzimuth | Logical scalar indicating if azimuth is included in the measurement. This
field is not relevant when the | 1 |
HasElevation | Logical scalar indicating if elevation information is included in the measurement. For
measurements reported in a rectangular frame, and if
HasElevation is false, the reported measurements assume 0
degrees of elevation. | 1 |
HasRange | Logical scalar indicating if range is included in the measurement. This
field is not relevant when the | 1 |
HasVelocity | Logical scalar indicating if the reported detections include velocity measurements. For a
measurement reported in the rectangular frame, if HasVelocity
is false , the measurements are reported as [x y
z] . If HasVelocity is true ,
the measurement is reported as [x y z vx vy vz] . For a
measurement reported in the spherical frame, if HasVelocity
is true , the measurement contains range-rate
information. | 1 |
IsParentToChild | Logical scalar indicating if Orientation performs a frame rotation from the parent coordinate frame to the child coordinate frame. When IsParentToChild is false , then Orientation performs a frame rotation from the child coordinate frame to the parent coordinate frame. | 0 |
If you want to perform only one coordinate transformation, such as a transformation from the body frame to the sensor frame, you must specify a measurement parameter structure. If you want to perform multiple coordinate transformations, you must specify an array of measurement parameter structures. To learn how to perform multiple transformations, see the Convert Detections to objectDetection Format example.
Data Types: struct
Output Arguments
measurement
— Measurement of state
real-valued N-element row vector | real-valued M-by-N matrix
Measurement vector, returned as an N-element real-valued row vector or an M-by-N real-valued matrix. M, the size of each measurement, can vary depending on the syntax. For more information, see the following table. N, the number of measurements, is the same as the number of states. The format of the measurement vector depends on the syntax.
When you do not specify the
measurementParameters
argument and set theframe
argument to'rectangular'
, the function outputs measurement vectors in the format of[x;y;z]
.When you do not specify the
measurementParameters
argument and set theframe
argument to'spherical'
, the function outputs measurement vectors in the format of[az;el;r;rr]
.When you specify the
measurementParameters
argument and set theframe
field to'rectangular'
, the size of the measurement vector depends on the value of theHasVelocity
field in themeasurementParameters
structure. The measurement vector includes the Cartesian position and velocity coordinates of the tracked object with respect to the ego vehicle coordinate system.Rectangular Measurements
HasVelocity
='false'
[x;y;z]
HasVelocity
='true'
[x;y;z;vx;vy;vz]
Position units are in meters and velocity units are in m/s.
When you specify the
measurementParameters
argument and set theframe
field to'spherical'
, the size of the measurement vector depends on the value of theHasVelocity
,HasRange
, andHasElevation
fields in themeasurementParameters
structure. The measurement vector includes the azimuth angle, az, elevation angle, el, range, r, and range rate, rr, of the object with respect to the local ego vehicle coordinate system. Positive values for range rate indicate that an object is moving away from the sensor.Spherical Measurements
HasRange
='true'
HasRange
='false'
HasElevation
='false'
HasElevation
='true'
HasElevation
='false'
HasElevation
='true'
HasVelocity
='false'
[az;r]
[az;el;r]
[az]
[az;el]
HasVelocity
='true'
[az;r;rr]
[az;el;r;rr]
[az]
[az;el]
Angle units are in degrees, range units are in meters, and range rate units are in m/s.
Data Types: double
bounds
— Measurement residual wrapping bounds
real-valued two-element row vector | M-by-2 real-valued matrix
Measurement residual wrapping bounds, returned as a two-element real-valued row vector or an
M-by-2 real-valued matrix, where M is the size of each
measurement. Each row of the matrix corresponds to the lower and upper bounds, respectively,
of each measurement in the measurement
output.
The function returns different bound values based on the frame
input.
If you specify
frame
as'Rectangular'
, each row of the matrix is[-Inf Inf]
, indicating that the filter did not wrap the measurement residual.
If you specify
frame
as'Spherical'
, the function returns bounds for each measurement based on the following:When
HasAzimuth
=true
, the matrix includes a row of[-180 180]
, indicating that the filter wrapped the azimuth residual in the range of[-180 180]
in degrees.When
HasElevation
=true
, the matrix includes a row of[-90 90]
, indicating that the filter wrapped the elevation residual in the range of[-90 90]
in degrees.When
HasRange
=true
, the matrix includes a row of[-Inf Inf]
, indicating that the filter did not wrap the range residual.When
HasVelocity
=true
, the matrix includes a row of[-Inf Inf]
, indicating that the filter did not wrap the range rate residual.
If you set any of the fields to false
, the returned
bounds
do not contain the corresponding row. For example, if
HasAzimuth
= true
, HasElevation
=
false
, HasRange
= true
,
HasVelocity
= true
, then the function returns the
bounds as:
-180 180 -Inf Inf -Inf Inf
The filter wraps the measuring residuals based on this equation:
where x is the residual to wrap, a is the lower bound, b is the upper bound, mod is the remainder after division, and xwrap is the wrapped residual.
Data Types: single
| double
More About
Azimuth and Elevation Angle Definitions
The azimuth angle of a vector is the angle between the x-axis and its orthogonal projection onto the xy-plane. The angle is positive when going from the x-axis toward the y-axis. Azimuth angles lie between –180 and 180 degrees. The elevation angle is the angle between the vector and its orthogonal projection onto the xy-plane. The angle is positive when going toward the positive z-axis from the xy-plane.
Extended Capabilities
C/C++ Code Generation
Generate C and C++ code using MATLAB® Coder™.
Version History
Introduced in R2024b
See Also
Functions
ctrv
|ctrvjac
|ctrvmeasjac
|cvmeas
|cameas
|ctmeas
|singermeas
|initctrvekf
|initctrvukf
Objects
MATLAB 명령
다음 MATLAB 명령에 해당하는 링크를 클릭했습니다.
명령을 실행하려면 MATLAB 명령 창에 입력하십시오. 웹 브라우저는 MATLAB 명령을 지원하지 않습니다.
Select a Web Site
Choose a web site to get translated content where available and see local events and offers. Based on your location, we recommend that you select: .
You can also select a web site from the following list:
How to Get Best Site Performance
Select the China site (in Chinese or English) for best site performance. Other MathWorks country sites are not optimized for visits from your location.
Americas
- América Latina (Español)
- Canada (English)
- United States (English)
Europe
- Belgium (English)
- Denmark (English)
- Deutschland (Deutsch)
- España (Español)
- Finland (English)
- France (Français)
- Ireland (English)
- Italia (Italiano)
- Luxembourg (English)
- Netherlands (English)
- Norway (English)
- Österreich (Deutsch)
- Portugal (English)
- Sweden (English)
- Switzerland
- United Kingdom (English)