Password

User password for operating system on target hardware

Model Configuration Pane: Hardware Implementation / Simulink or Embedded Coder Hardware Support Package / Hardware board settings / Target hardware resources / Board Parameters

Description

The Password parameter sets the user password for the operating system on the target hardware.

When you use the Support Package Installer to update the hardware board firmware, the Support Package Installer automatically applies the value you entered there to this parameter.

Dependencies

None

Settings

root (default) | character vector

Select a user password for the operating system on the target hardware.

Examples

expand all

Set Device Password

In the Simulink^® Editor, select Simulation > Model Configuration Parameters.
In the Configuration Parameters dialog box, click Hardware Implementation.
Set the Hardware board parameter to either:
- Xilinx Zynq ZC702 evaluation kit
- Xilinx Zynq ZC706 evaluation kit
- ZedBoard
Then, click Apply.
The parameter values under Hardware board settings are automatically populated to their default values.
If you chose Xilinx Zynq ZC706 evaluation kit or ZedBoard, set the Feature set for selected hardware board to Simulink or Embedded Coder Hardware Support Package and click Apply.
From the Board Parameters group, select a Password and click Apply.
Click OK to close the dialog box.